| ≥1 piece |
Technical Parameter:
| TYPE | DMK-PET48A | DMK-PET48B | ||
| INJECTION UNIT | Screw L/D Ratio | L/D | 25 | 25 |
| Injection Pressure | Kgf/C ?O | 875 | 875 | |
| machine Size(LxWxH) | mm | 9100×3790×2240 | 9100×3790×2240 | |
| Theory Shot Volume(Max) | ?M | 1815 | 2905 | |
| Shot Weight(PS) | g | 2178 | 3486 | |
| ozs | 77 | 123 | ||
| CLAMPING UNIT | Clamping Force | T | 360 | 360 |
| Clamping Stroke | mm | 645 | 645 | |
| Max/Min Thickness of Mould | mm | 300~720 | 300~720 | |
| Space Between Tie Bars (WxH) | mm | 660×860 | 660×860 | |
| Ejector Stroke | mm | 180 | 180 | |
| Ejector Force | T | 12 | 12 | |
| NO.of Ejector Pins | pcs | 5 | 5 | |
| Max Pressure of System | Kg/C ?O | 140 | 140 | |
| INJECTION MOULD | Cavity (Max) | PCS | 48 | 48 |
| Neck of Bottle (Max) | mm | 42 | 42 | |
| Length of Preform(Max) | mm | 190 | 190 | |
| Weight of Preform(Max) | g | 35 | 45 | |
| Form of Mould | Pneumatic pin-valve gate hot-runner | |||
| POWER UNIT | Pump Motor Power | KW | 82 | 82 |
| Robot Power | KW | 12 | 12 | |
| No.of heater Zones(0~400 ?? ) | set | 49+10 | 49+10 | |
| Heater Input Capacity | .KW | 53 | 58 | |
| Mould Heater Capacity | KW | 51 | 51 | |
| Auto Manipulator | Manipulator | Cav | 144 | 144 |
| Cooling Form | Cav | 144 | 144 | |
| OTHER REQUEST | Electric Power supply (3-phase AC) |
V | 380 | 380 |
| KW | 155 | 155 | ||
| Chilling Water | degree | 5~15 | 5~15 | |
| Mpa | 0.45 | 0.45 | ||
| L/min | 600 | 600 | ||
| Cooling Water | degree | 30-55 | 30~55 | |
| Mpa | 0.25 | 0.25 | ||
| L/min | 200 | 200 | ||
| Compressed Air | Mpa | 0.7-0.9 | 0.7~0.9 | |
| L/min | 800 | 800 | ||
| Compressed Air (Max) | Pcs/h | 17000 | 17000 | |