Back Pain Therapeutic Heat Pad(Manufacture with FDA/CE/MSDS),China Artborne/Hot Cold Pads price supplier

Back And Waist Aches Relief Heating Pads

 

Model No.: MHP4

SIZE: 40x14 cm

WEIGHT:  900gs

Packing: 1pc/color box        12pcs/ctn

carton size:51.5x21x24 cm    N.W./G.W.:10.8kgs/12.8kgs   

 

OEM service and printing logo service are available.

 

How to use:

 

1) To active:

Flex the metal disc inside the pad back and forth to start the reaction. The liquid will be getting crystallize .When the crystallization completed, squeeze the heat pad to make it soft and ready to use.

 

2) To recharge:

Place the heat pad in boiling water with cloth below for about 5 minutes until all the crystals disappear, then recharge it.

 

 

 

Used frequency	Recommended use twice a day,each time of 20-30 minutes for heat/cold.
Validity	3 Years.
Storage and use	Ambient temperature at -10-60 degree.

  

 

 

  

Samples Availability & Policy

As usual, a fresh customer is requested to pay the express courier freight & sample Fee or a freight-collect express courier A/C is provided, the samples will be sent out in a short time.The sample fee will be refunded to customer after the customer places a firm order with us.

Payment Terms & Policy

The general terms of payment is L/C at sight or 30% down payment T/T before production, the balance to be paid against the fax copy of shipping documents. Also this term is flexible according to business cooperation relations and both parties benefit.

Quality assurance

We will send you our company’s inspection report before each shipment. If you require, quality assurance will be executed with regular investigations by TüV or SGS inspectors, but the charges are for your account.

Looking for a specific article not on this website?

We only put some of our products on the website, we’ll send you more photos for your choices once you send us your enquiry.

Delivery time?

For the magic heat pad products, the delivery time will be within 25-45 days upon the receipt of 30% deposit or L/C at sight.

For the polyresin and ceramic handcrafts, the delivery time will be within 45-60 days upon the receipt of the 30% deposit or L/C at sight.

What is in the pad?

The pad contains water and food grade sodium acetate (a form of salt) and a stainless steel disc.

How is the heat produced?

Flexing the metal disc in the liquid creates a chain reaction causing the pad to crystallize. This crystallization ALWAYS occurs at a temperature of 130 degrees F / 53 degree C.

Once activated, the pad has available to it a predetermined amount of energy. It will use this energy to increase the temperature of the pad to approximate 130 degrees F / 54 degree C and use whatever is left to maintain that temperature. This ability to produce heat for a period of time is accomplished because all of the liquid does not crystallize immediately. Molecules that were not required to heat the pad to its maximum temperature will remain liquid, and crystallize as required, to maintain the maximum temperature.

How do you re-use the pad?

Once the pad has given off all of its heat it will remain in its crystallized state until it is recharged. This is accomplished by placing the crystallized pad in boiling water for 5 to 10 minutes (depending upon the size of the pad) until all of the crystals are melted. Once completely liquefied, remove the pad from the water and store it until it is required. The pad should remain liquid as it cools. If crystals form as the pad cools it has not been boiled long enough. Place the pad in boiling water again until all the crystals have dissolved and the pad is completely clear.

How long does the heat last?

The pad will be very hot for the first 30 minutes and then will gradually cool down.

How many times can the pad be used?

There is no limit as to the number of times a pad can be used.