blowinglollipop candy machine,China AX price supplier

blowing lollipop candy machine

Technical parameters and Configuration
1. Extrusion machine part
Screw diameter 55mm
Screw L/D rati 28/1
Form of structure Undulation with the mixing head screw
Screw material  the material use the 38CrMoAlA
Processing craft normalizing-tempering-stress relief-nitriding
Screw max. rotating speed 80M/MIN   
Cylinder heating area quantity 4 area  
Heater form stainless steel heater
Structure and form Inner use the cast-aluminium circle,outer use the stainless steel heating coil.
Reducer box material matched the hard tooth face gear box.
Gear box lubricating method Oil circulation lubrication
Host motor power 15KW The motor frequency conversion control
2. Mould head parts
Mould head diameter 200
Mould head gap 1.2-2.0MM
Heater stainless steel heater
Nose material:45# The nose inner flow pipeline plates the hard chromium

3. Cooling device
Material cast aluminium wind link(air cooling)  
Wind link cooling air machine power 1.1KW    
4. Pulling system
Steel frame structure:equipped with the safe operation Platform and the security guard rail
Pulling height 5.0M        
Pulling roll length 900MM
Pulling roll material rubber roll
Pulling motor 1.1KW The motor frequency conversion control
Herringbone board installment material quadrate steel structure frame
The frame of machine uses quadrate steel type,the staircase uses the staircase with a handrail type
Winding form Friction type single winding;controlled by torque motor
Winding motor 10N/M torque motor
Winding speed 10-60M/MIN
With the arithmometer device 
Effective blowing specification
Blowing width 500-800MM(folding diameter)
Blowing thickness 0.005-0.1mm
Suitable material  LDPE HDPELLDPE

EXTRUSION SYSTEM:

 

model	AX1500
Max. Width of Blowing Film	1500mm
Film Thickness (mm)	0.03-0.2mm
Max. Output(kg/h)	350
Raw Material	LLDPE,LDPE,HDPE
Auto loader	330*3
Screw Diameter(mm)	60/65/55
Screw L/D Ratio	30:1
The material of screw	38CrMoAL
The material of cylinder	38CrMoAL
Cylinder heating zone	4 zone
Hardened gear box	200/180/180
The power of main motor(kw)	37/30/30
Frequency changer	YASKAWA
MOTOR	SIMENS

 

1.we use hardened gearbox with high grade bearings excellent extrusion quality.

 

2.This one use IBC Inner cooling system it make machine cool and improve output.And we use two winding system

 

 

3.Automatic winding system:

  Surface friction type with double winding. Automatic winding, roll-changing and unloading, Rewinding Speed: 5-40m/min

 

 

4.Traction system:we use up Traction Rotary ,it can make film smooth.

 

5.we use the bestElectrical equipment  :   

 Temperature control meter (OMROM)

                         Circuit breaker (Schneider)

                        Switch (Schneider)          

                        Contactor (Schneider)

WE USE 30:1 SCREW WE USE DOUBLE MOUTH AIR RING, WITH  IBC AND DOUBLE LAYER HEATER .

MACHINE PICTURE :

 

  

 

MORE  AND DETAIL INFORMATION WELCOME TO ASK ME .