cheap price good quality infrared sensors LED T8 tube 16w t8 red tube sex led vietnam tube cinnamon,China JYO price supplier

1. 1.     Introduction :           16w t8 red tube sex led vietnam tube cinnamon 6500    

LED fluorescent tube is a high-grade indoor lighting, the entire lighting design beautiful and simple, luxurious atmosphere, light backlight technology through the formation of a homogeneous lighting effect, illumination uniformity, light and soft, yet bright and comfortable, which can effectively relieve eye fatigue. Radiation, will not stimulate pregnant women, the elderly, children's skin .

2.Characteristic :                16w t8 red tube sex led vietnam tube cinnamon 6500

 

1.Aluminum heat sink base type light emitting diodes can help more quickly dissipate heat generated by its operation, improve life .

2.Constant current drive can improve the life of more efficient light-emitting diodes and support PFC can effectively reduce power to make false .

3. Use a small chip shunt principle allows current per unit area of the chip to improve the effective utilization increased luminous efficiency.

4. Built lamp transformer system and fully support the traditional T8 lamp holder effectively enhance the convenience of use.

  

3.Product Features :                      16w t8 red tube sex led vietnam tube cinnamon 6500

2.Easy installation, saving the cost of renovation, high safety performance ;

3.Green light: do not use mercury, lead-free, environmentally friendly lighting;

4.Using high-quality, high-brightness LED as the light source, no glare, no flicker, uniform light-emitting surface;

5.Saving --- at the same illuminance, 15W of LED fluorescent tube is equivalent to 40W traditional fluorescent lamp, the power efficiency of up to 62%

6.Long Life ---- Tube life of more than 50,000 hours, 10 times that of traditional fluorescent lamps ;

7.Optional wide voltage input: 100-260AC

8.Using light transmittance over 90% of the shade material; shell is made of high quality aluminum alloy, more rapid cooling ;

9.No noise at work and strobe, frequent switching does not affect the light source;

Viewing angle can be 310 degrees, 270 degrees conventional maximum only closer now used fluorescent 360 ;

4.Technical Specifications               16w t8 red tube sex led vietnam tube cinnamon 6500

5. distribution curve flux:                 16w t8 red tube sex led vietnam tube cinnamon 6500

 

Here is an example in being white LED 1M, illuminance values 2M, 3M's :

6.Package                           16w t8 red tube sex led vietnam tube cinnamon 6500

 

7. Installation                   16w t8 red tube sex led vietnam tube cinnamon 6500

Step 1:Unplug before installing the starter and ballast

Step 2:Please start the AC power into the lamp into the unit according to the spin mode lamps

To ensure the safety of the lamp power, and more power-saving effect Always clean lines installed LED lamps

In addition to removing the starter must be in addition to connecting the external ballast wiring, the wiring diagram is as follows

 

 

This product is immersed in liquefied ban .

1.According to the design of the device, the applicable body built-in transformer voltage AC100 ~ 260V

2.This device has a moisture proof design, but not directly into the water

3.This means a delay of about two seconds at the start of a normal phenomenon

7. Notice:

Note the lighting installation

1. Insulation group of anti lower than the predetermined value, the fear of electrocution, risk of fire, the insulation should be repaired before making electricity.

2. Confirm normal operation switch, lighting, lights, dimming status.

3. Confirm the installation status lamp again.

   3.1 Is firmly installed, the power supply wiring is good, check if there are falling lamps, lighting can not be in danger.

   3.2 Power wiring, battery wiring, lamps, lamp holders are indeed co-Kan.

4. Lamps of different materials depending on cleanliness, note the following :

   4.1 Surface processing part: quality materials, soft cloth to gently wipe, wipe with a material too thick to avoid paper.

   4.2 Plastic: A lukewarm salt water produced stone, stone salt water to a soft cloth to wipe the dirt from, then rinse with water after, placed in the shade, making it dry naturally.

   4.3 Cooling Aluminum: Wipe with a dry cloth if the surface dirt stains, please use the neutral detergent, then rinse. If the cooling surface hairline aluminum processing, please wash along the rubbing direction.

8. Emergency

Status: No action, smoke, odor, flashing or different sound; deal: If you can not properly please notify the professional assistance.