chewing gum base mixer,China JCT- kneading machine price supplier

 chewing gum base mixer

1. INTRODUCTION OF chewing gum base mixer

Kneading machine is a widely-used mixing machine for viscous products making.

1. Blades :  Two sigma or Z-type blades

2. Rotated speed control :  Equipped with inverter for frequency control

3. Discharge method : Hydraulic tilting discharge; Bottom discharge

4. Heating method : Oil heating, electric heating, steam heating

5. Cooling method : Water cooling

6. Materials : Stainless steel (SS306/ SS316), Carbon steel (Q235-B)

 

2. TECHNICAL PARAMETERS OF chewing gum base mixer

Model	Volume	Motor power	Discharge mode	Heating & Cooling	Vacuum degree (Mpa)
NHZ-5	5	1.1-2.2	Hydraulic tilting	Oil/ Steam/ Electric heating Water cooling	-0.098
NHZ-10	10	1.5-3
NHZ-20	20	3-5.5
NHZ-50	50	4-7.5
NHZ-100	100	5.5-7.5
NHZ-200	200	7.5-15	Hydraulic tilting/ Screw discharge/ Bottom discharge
NHZ-300	300	11-18.5
NHZ-  500	500	18.5-30
NHZ-1000	1000	22-55
NHZ-2000	2000	45-75
NHZ-3000	3000	55-110
Data in this table for reference, the actual data according to specific process requirements, material viscosity and other design.

 

3. APPLICATIONS OF chewing gum base mixer

 

4. PICTURES OF chewing gum base mixer

Production line

 

500L kneading machine

 

20L kneading machine

 

Blade of the kneading machine

  

Q: Can you send the formula for the products we want to make?

A: Our machines can be used for many kinds of product making, such as Resin, Paint, Adhesive, Cosmetic, Food, Chemicals. There are many kinds of these products, so it's impossible for us to know all the formulas and technologies. We can assist you to find the raw material list you need, and after you place order with us, we can help you to find formula and technology, there will be engineers to teach you how to make the product, and the cost will be on your account.

 

Q: Do you have machines in stock?

A: Yes, but just the small-scale machines. Machines are different with other products, most of the large-scale machines are designed according to our customers' requirements, different customers have different production requirements, so the technical parameter is different for most machines. On the other hands, most of the our machines will cover a large area, so once the machines are finished, we will effect shipment after QC.

 

Q: Can you send the detailed drawings of the machine to us before we place order?

A: We can send you a draft drawing of the machines, and after you place order and pay the deposit, our engineer will design the specific technical parameters fo you and send you the detailed drawings. Once you confirm without questions, we will put it into production.

 

Q: Why does it take at least 20 days to finish the machine?

A: Once receipt the deposit from you, we will design the drawings and make out the list of the materials and Accessories for the production. Once the drawings are finished, our workers will start the production, from welding, polishing, assembling, debugging, detection and so on. After finish, they need time to check the machines, if found any possible defect parts, they will return to the production until every part is 100% approved.

 

Q: Can we pay the balance after we receive the machines and test without problems?

A: It's unnessary to worry about the quality of our machines, we are confident in that. After the machine is finished, we can install and test the machine for you (if you can not come to our factory, we can record a vedio and send to you). Only after you check without problems, we will effect shipment. 

 

Q: If you price is higher than the suppliers for the products that are not made by you?

A: We can provide the whole production lines, which include many facilities and accessories(like Oil furnace, steam boiler, etc). It's impossible for us to make everyone of them, because we just make the main machines. However, based on our great reputation in the business, and also considering our huge sourcing quantity by collecting the orders from domestic and foreign customers, and our strong cash flow to pay the suppliers in advance. We can get the best offer from the suppliers. So after adding an reasonable profit for the outsourcing facilities and accessories (like Oil furnace, steam boiler, etc), we still can offer a very competitive price similar to our suppliers, or even lower in some case. 

 

Certifications

  

 

Our company and factory

  

5. OUR CUSTOMERS

6. CONTACT US

 

 

hot sale industrial chemical mixer machine