Desiccated coconut belt drying machine,China yeping price supplier

DW series belt drying Machine

Features:

 

1, the bulk production continuous type dry

2, used for permeability good flake, strip, block or particle Materials dry

3 and dehydrated vegetables, Chinese medicine yinpian for such high moisture content, and materials of high temperature not allowed the material particularly appropriate

4, Filter cake of dehydration of creamy materials, made by granulation or club-shaped can dry after

5, this series of drying machines have the drying speed is fast, evaporation strength, high product quality good points

 

Working principle:

 

The material is add feeder spread evenly over the nets take, mesh belt generally USES 12-60 mesh stainless steel wire mesh, by the transmission device in the dryer drag in mobile.

 

Composed by several unit dryer, each unit, part of exhaust air independent cycle by special platoon is wet fan eduction, each unit discharge waste gas by regulator control, are hot from the top down or from down to up through the mesh belt covered with materials with complete the process of mass transfer heat, take moisture of material.

 

Net belt running speed slow moving, according to materials after drying temperature free adjustment, the finished product in charge for fall into view.

 

According to the needs of user and cycle unit can be flexibly equipped with, can choose according to need unit number.

 

Generally use three equipment conclaves use dry period beginning. Formation section and eventually dry middle, segments.

 

In the beginning in paragraph. Due to material moisture high. Permeability is poor, so should use smaller pave the material thickness, fast speed and high drying temperature.

 

Early in the paragraph, dry dry gas temperature can be as high as 120 ~ C above. Finally period beginning staying time of material in the dry section 3 ~ 6 times, paving material thickness is dry period beginning 2-4 times.

 

 For no more than 60 °C temperature materials can be used in the request, about 80 °C for dry gas. Adopt more paragraphs combination can better play belt drying machine performance. And dry more even.

 

USES:

 

Belt drying machine is commonly used for drying equipment, and can be widely used in chemical industry, food, medicine, construction materials, electronic industries, particularly suitable for breathable good slice, roll the dry granular materials to filter cake, of creamy materials, can also be raised by the rotofomer or squeeze for drying after molding mechanism.

 

Typical products/ Application scope :

 

Dehydrated vegetables, granule feedstuff, monosodium glutamate, chicken essence, pastry dough for about, organic pigment, synthetic rubber, propylene fiber, drugs, medicinal materials, small wood products, plastic products, electronic components aging, curing, calcium carbonate, white carbon black dyestuff, etc.

 

Technical  parameters

type	DW-1.2-8	DW-1.2-10	DW-1.6-8	DW-1.6-10	DW-2-8	DW-2-10
unit number	4	5	4	5	4	5
Width of belt(m)	1.2		1.6		2
Length of drying section(m)	8	10	8	10	8	10
Thickness of spread raw matherial(mm)	10-80
Temperature of operation(°C)	60-130
Pressure of steam(mpa)	0.2-0.8
Consumption of steam(kg/h)	120-300	150-375	150-375	170-470	180-500	225-600
Drying time(h)	0.2-1.2	0.25-1.5	0.2-1.2	0.25-1.5	0.2-1.2	0.25-1.5
Drying strength(kg/h)	60-160	80-220	75-220	95-250	100-260	120-300
Total power of equipment(kw)	11.4	13.6	11.4	13.6	19.7	15.8
Overall dimensions
l(M)	9.56	11.56	9.56	11.56	9.56	11.56
w(M)	1.49	1.49	1.9	1.9	2.32	2.32
h(M)	2.3	2.3	2.4	2.4	2.5	2.5
weigh(kg)	4500	5600	5300	6400	6200	7500

If you  need the equipment , please provide the detailed material parameters. We will design as the material properties.