| ≥1 piece |
This co-extruder is capable to offer 1-6 ropes of 1 color or 1-4 ropes of 2 colors with capacity of max.1200kg/hour for bubblegum and chewy candy production. This machine is equipped with advanced electrical control system and mechanical conveying structure. It can feed max. 6 sets cut & wrap machines continuously and is reliable in safety and convenient for operation.
MECHANICAL CONSTRUCTION
The extruder is equipped with two barrels mounted on one frame, each barrel with two F 1 4 0 infeed Rollers and two F 1 35 extrusion screws attached.
Two sets of 60-liter hoppers on top of the barrels are built in two parts. Various forming dies are properly designed as requested, correspond to different shapes of product.
The extruder is equipped with three individual heating units. Heating or cooling of the barrels is controlled respectively by three water tanks via three thermo-regulators with digital display. Automatic adjustment starts when temperature has been set. The set temperature and the actual temperature are shown on the display.
The gearboxes are also installed on the extruder. Each unit includes gears gone through thermal procession. All axles are fixed on a ball bearing. The gears and the bearings run in an oil bath. The hydraulic reservoir is filled with special oil resistant to high-pressure. An electronic over-pressure protection device is fitted in each barrel accurately controlled by a microprocessor.
ELECTRIC APPLIANCES
Two A.C. frequency converters together with main driving motors are introduced to infinitely adjust the extrusion speed.
Each set of extrusion screws is assigned with a variator to regulate the ratio depending on various raw materials to be extruded. “Speed Up or Down” Operation is achieved by a variator when the ratio has been fixed.
The extruder is equipped with three thermo-regulators with temperature display. All electric components and adjustment device are positioned at eye’s level. All contactors, relays and fuses are installed in the control cabinet.
TECHNICAL DATA:
Extrusion capacity: Up to 1200 kg/hour
Number of candy ropes: 1~6 rope(s) for 1 color, 1~4 rope(s) for 2 colors
Extrusion screw dia: 135 mm
Infeed roller dia: 140 mm
Motor power: 2X9.2 kw
Power for water-heating: 3X6kw
Motor protection: IP 55
Speed adjustment range: 1:30
Water consumption: 300lt/hour
Machine weight: 27 00 kg
Overall dimension: 2660X1710X1650mm