High Capcity corn starch sauce dryer,China robeta price supplier

 

The overview  of dryers for wood

 

The sawdust dryer is one of the traditional drying equipment.

 

The diameter : Φ600-Φ4000 , and the length will depend on the requirement of drying. The wet material into the rotary dryer is turned up and thrown down repeatedly by the plate, and in the process of falling it is broken into small particles and scattered units, with substantially increased specific surface area, and in full contact with the hot wind and dry.

 

The features of dryers for wood

 

The sawdust dryer is with strong dealing capacity, low fuel consumption, low drying cost. Dryer is charactered with high temperature resistance, and use the high temperature hot wind to make the material rapid drying. Strong scalable capacity, design considerations of the production margin, so even a small increase in production, but also not need to replace the equipment .

 

The scope of using of dryers for wood

 

1: chemical, mining,metallurgical and other industries, such as ore, slag, coal, metal powder, clay, diatomite, kaolin.

 

2: Agriculture, feed, fertilizer industries, such as stalks, grass, sawdust, leaves, fish meal, corn, rice, wheat, corn starch sauce, starch slag, vinasse, dregs, pomace, soy sauce residue, bagasse, grass charcoal, organic compound fertilizer, sludge, waste of aquatic products, wastes in the food factories, slaughterhouse waste, organic fertilizer, inorganic fertilizer, phosphate fertilizer ammonium sulfate.

 

3: For the drying of the powder with special requirements and granular materials. Such as: various crystals, light calcium carbonate, active floridin, magnetic powder, graphite, inorganic slurry, argil, line slurry, mineral slurry, phosphorus slag, red mud from aluminium plant.

 

4: Materials which request low temperature drying and bulk continuous drying.

 

 

The main technical parameters of dryers for wood

 

Type (mm)	Lean  (%)	Revolving speed (r/min)	Inlet temperature (°C)	Power (Kw)	Cubage (m3)	Throughput (t/h)	Weight (t)
Φ600×6000	3-5	3-8	≤700	3	1.69	0.5-1.5	2.9
Φ800×8000	3-5	3-8	≤700	4	4.01	0.8-2.0	3.5
Φ800×10000	3-5	3-8	≤700	4	5.02	0.8-2.5	4.5
Φ1000×10000	3-5	3-8	≤700	5.5	7.85	1.0-3.5	5.6
Φ1200×10000	3-5	3-8	≤700	7.5	11.30	1.8-5	14.5
Φ1200×12000	3-5	3-8	≤700	11	13.56	2-6	14.8
Φ1500×12000	3-5	2-6	≤800	15	21.19	3.5-9	17.8
Φ1800×12000	3-5	2-6	≤800	18	30.52	5-12	25
Φ2200×12000	3-5	1.5-6	≤800	18.5	45.59	6-15	33
Φ2200×18000	3-5	1.5-6	≤800	22	68.38	10-18	53.8
Φ2200×20000	3-5	1.5-6	≤800	30	75.98	12-20	56
Φ2400×20000	3-5	1.5-5	≤800	37	90.43	18-30	60
Φ3000×20000	3-5	1.5-5	≤800	55	141.3	25-35	78
Φ3000×25000	3-5	1.5-5	≤800	75	176.6	32-40	104.9

 

 If you have any questions , please connect me freely!