Hot wind drying device coconut drying machine,China KINKAI price supplier

KINK AI Air source heat pump drying machine introduction:

 

 

 

 

Features:

1. New design idea- a new genernation energy saving dryers with two times waste heat recovery;

2. Adopt heat regenerators to dehumidify;

3. Adopt touch screen controllers and dry/wet bulb to control temperature and humidity, operation drying machine easily and more accurate;  

4. Adopt duct-type drying method, it with shorter drying time and well-distributed hot air, drying time shorter 30% than old models;

5.During drying, the material does not craze,does not distortions, non-discolouring,never degenerate, non-oxidize, drying completely,with good Rehydration, keep nutrient content;

6.Economical: KINKAI heat pump technology offers running costs that are typically up to 75% lower than with a conventional drying mahcine ;

7.Environmental friendly;

8.Multifunctions: heating drying / cooling drying / dehumidify;

9.High / low pressure protection;

10.Power failure remember;

11.Supply dryer+drying chamber.

 

How do air source heat pump  drying machine  work?

 

 

Technical Parameters 

Model		JK03RD	JK06RD	JK10RD
Suitable for drying chamber	m3	10~20	20~30	30~40
Power supply	V/PH/HZ	380/3/50 or 220/1PH/50	380/3/50	380/3/50
Power input	KW	2.8	5.8	10.8
Running current	A	8/17	12.6	22.5
Auxiliary electric heater(option)	KW	9	9	9
Heating capacity	KW	12	26	35
Cooling capacity	KW	7.5	20	25
Dehumidification amount	L/H	8	20	40
Max. hot air Temperature	°C	75	75	75
Working ambient temperature	°C	-10~45	-10~45	-10~45
Refrigerant	Kg	Mixture type/2.5	Mixture type/4.3	Mixture type/8.0
Compressor	Type	Scroll	Scroll	Scroll
	Brand	Copeland/Danfoss	Copeland/Danfoss	Copeland/Danfoss
	Quantity	1	1	2
Noise	dB(A)	60	65	70
Fan motor for drying	Power input/unit	250W/unit	250W/unit	250W/unit
	Wind volume	m3/H	m3/H	2500m3/H/unit
	Recommend  qty	8	8	16units
Heat regenerator size	mm	500*350*350	500*500*580	550*600*680
Fan motor for heat regenerator (dehumidify)	Power input	200W	370W	550W
	Wind volume	2000m3/H	2000m3/H	3500m3/H
	Size(mm)	450*330*380	470*320*470	580*320*580
Wind valve	Power input	6W	6W	6W
	OPEN	Exchange fresh air	Exchange fresh air	Exchange fresh air
	CLOSE	Drying	Drying	Drying
	Size(mm)	480*320*120	630*560*120	720*640*125
Fan motor for Evaporator  (2 units)	Power input	250W/unit	780W/unit	780W/unit
	Wind volume	4600m3/H	10500m3/H	2*10500m3/H
	Rotate speed	1350RPM	1350R/Min	1350R/Min
Hot air outlet	mm	600*1100	650*1100	860*1485
Hot air return inlet	mm	690*1100	750*1100	1050*1450
Dimension(L*W*H)	mm	1650*960*1280	1720*1160*1280	2100*1460*1590
Net weight	Kg	210	385	480
Gross weight	Kg	240	420	540

 

 

Applications

Can dry all kinds of materials, such as vegetables, fruits, apples, pawpaw, coconut, mango, banana, spice, sea cucumber, seaweeds, beef, jerky, fish, herbs, onions, gingers, chili, pepper, cabbage, carrot, Tea leaves etc.

 

Our drying project cases:

 

 

 

Our business trade way:

1.MOQ: 1 pcs

2.Payment: T/T(30% deposit, 70% balance before shipment, except for samples 100%)

3.Delivery time: 7~25 days after received deposit

4.Warranty: one year

After installation,during the guarantee period,our company will be responsible for problems caused by quality of production or raw material except the damageable spare parts of heat pump caused by incorrect man-made operation.

 

Conventionally, materials are dried either in the field (sun drying) or using 
high temperature dryers (electric, gas fired, etc.). Successful outdoor drying 
depends upon good weather and indeterminate weather can render a product 
worthless. High temperature drying can damage the nutrient content and impart an 
unpleasant smell to the dried product.
Specialty crops such as ginseng, herbs, echinacea, etc., 
need to be dried at low temperatures (30 - 45Celsius degree) for product quality 
optimization. This is an important consideration as they have a relatively high 
commercial value. Heating ambient air to use for drying, although a simple 
cost-effective procedure, is of limited application, particularly at higher 
ambient air relative humidities because of the low allowable maximum temperature 
conditions. Under high ambient moist air conditions, it may not even be possible 
to dry the material by conventional means. High temperature drying deteriorates 
the material structure and can render it unsuitable for further use. Low 
temperature drying of specialty crops reduces the risk of loss in nutrient 
content and damage to physical properties. Drying system incorporating a 
dehumidification cycle have been developed that both conserve energy and handle 
the material gently. The dryer operates using a heat pump where both sensible 
and latent heats are recovered from the exhaust air. The heat is then recycled 
back through the dryer by heating the air entering the dryer. The heat pump 
drying system is a combination of two sub-systems: a heat pump and a 
dryer.
The heat pump operates according to a basic air 
conditioning cycle involving four main components: the evaporator, the 
compressor, the Condenser and the expansion valve.
The working fluid (refrigerant) at low pressure is 
vaporized in the evaporator by heat drawn from the dryer exhaust air. The 
compressor raises the enthalpy of the working fluid of the heat pump and 
discharges it as superheated vapor at high-pressure. Heat is removed from the 
working fluid and returned to the process air at the condenser. The working 
fluid is then throttled to the low-pressure line (using an expansion valve) and 
enters the evaporator to complete the cycle.
In the dryer system, hot and dry air at the exit of 
condenser is allowed to pass through the drying chamber where it gains latent 
heat from the material. The humid air at dryer exit then passes through the 
evaporator where condensation of moisture occurs as the air goes below dew point 
temperature.