HDPE Injection Grade
Tests Value Unit
Melt Flow Rate (MFR) 15 g/10min
Density 0.922 g/cm3
Tensile Yield Strength 7 Mpa
Elongation at Break 75 %
Wien Softening Point 85 °C
Packing In 25 kg PP woven bags, 20MT/20FCL
HDPE Film Grade
Tests Value Unit
Melt Flow Rate (MFR) 2 g/10min
Density 0.9225 g/cm3
Tensile Strength 9 Mpa
Elongation at Break 500 %