Milk Ultra High Temperature treated,China HAUTEK price supplier

       General Material pumped by the pump in the cold sterilizer material obtained by heat exchange apparatus preheated temperature and then pressure filled through the barrel, the material is rapidly heated to the Sterilization temperature and maintained before and after about 3 seconds, wherein the microorganism and Enzymes will soon be killed. Material out of the barrel temperature through heat exchange with cold material to obtain cooling, the general temperature is below 65 °C. If the next process may need to raise the temperature by adjusting the angle globe valve or other means to achieve the required cycle, otherwise the cooling water through access to lower discharge temperatures. The material through the throttle valve control, the valve can maintain a certain pressure at the boiling point of the material is higher than the maximum temperature. Normal production regulating the valve, the pump driving force to overcome the spring pressure and backpressure flow control, in the washing machine should be fully open sterilization. Circulation Tank can be used to prepare the acid solution, on the inner wall of the coil fouling effectively cleaned. Owing to the use of stainless steel three cocks, flow can be adjusted properly.

 

 

1, the continuous production , sterilization time is very short .
2, due to short heating time available quality products.
3 , the use of ultra-high temperature sterilization , the sterilization effect is particularly good .
4 , a centrifugal pump or high-pressure homogenizer used in series , a wide range of applications , high viscosity materials suitable for sterilization .
5, due to the design of the heat exchanger using hot and cold material with waste heat utilization economic effect, so the steam consumption is small .

 

 

Seven advantages :
1, It can reduce equipment investment 50% to 70% ( without boilers, boiler room and boiler is not configured ancillary facilities ) ;
2, reduce overall costs 40% to 60% ( sterilizing power consumption 22 ~ 24kW / t product, no coal ) ;
3, labor-saving 2 to 3 times ( including the fireman reduce operator personnel ) ;
4 , saving space 90% to 95% ( Needless boiler room, small footprint device itself , without ancillary equipment ) ;
5 , no " three wastes" emissions, protect the environment and achieve green plant ;
6 , sterilization temperature , time is short , to the greatest extent maintain product natural flavor and reducing the loss of nutrients beneficial to the body ;
7 , the use of high-tech sterilization technology instead of backward traditional boiler steam sterilization technology .

 

 

  Data

Model	Medium	Capacity (Ton/Hr)	Feed temperature(°C)	Sterilizing temperature (°C)	Output temperature (°C)	Heating medium & input temperatur (°C)	Cooling medium & input temperature (°C)
HTST- 5/5	Milk	1-5	5	85 ( 15S )	5	Hot water, 90	Ice water, 1
HTST-5/45	Milk	1-5	5	95 ( 300S )	45	Steam, 100	Water, 25
UHT-5/5	Milk	1-5	5	137 ( 4S )	5	Steam, 142	Ice water, 1
UHT-50/5	Milk	1-5	50	137 ( 4S )	90	Steam,  142	Water, 25
UHT-25/90	Milk	1-5	25	121 ( 10S ) 135 ( 5S )	45	Steam,  140	Water, 25
HTST-50/45	Milk	1-5	50	95 ( 300S )