New design ecigator big power & oringinal vision spinner ii,China ywmist price supplier

New design ecigator big power & oringinal vision spinner ii   

  ecigator ecig

(new design ecigator big power) Feature:

 1. New upgraded and stable PCB control head

2. More comfortable and ergonomic spin dial for adjusting the voltage

3.Brand new and upgraded battery cell of 1600mA, which makes the Spinner II even  more powerful.

4. Longer life span for the new upgraded PCB and battery cell

 

 

(new design ecigator big power) Paramater

 

Vision Spinner eGo Variable Voltage Battery II (new design ecigator big power)
Operating Voltage(output):	3.3-4.8v
Charging voltage(input):	4.2v / 420mA
Screw Thread:	510/eGo
Capacity:	1600mAh
Colors:	Black,Blue,Green,Red,White,Stainless Steel
Button Led Light:	White,Blue,Orange
Size:	114.5(L)*16.5(D)mm
Weight:	61.8g(package not included)
Charging time:	5-6 hours
Packaging:	Paper box

 

Turn on/off the battery

• The battery is turned on/off by pressing the button five times in two seconds.
• When the battery is off, the button flashes three times in mixed color to indicate that battery is activated after pressing the button five times in two second.
• When the battery is on, the button flashes three times in mixed color to indicate that battery is off after pressing the button five times in two secon.

 

How to adjust output voltage?

• Spinner II is capable of outputting voltage from 3.3v to 4.8v.
• The bottom scale indicates the position of voltage output level.
• Rotate the bottom spin to align the red line with the bottom scale to arrive the voltage output level as marked in number.
• The red line on bottom spin can stay at any position along the scale between 3.3v and 4.8v to fine-tune your voltage output, despite the four locking position at 3.3v, 3.8v, 4.3v and 4.8v.
• Please be aware that the red line moves between 3.3v and 4.8v along the scale and do not push the red line on bottom spin to go over the 3.3v clockwise and 4.8v counter-clockwise; it may damage the battery if being pushed forcefully.

Power indication

• Spinner II could display three colors from the button to indicate the battery usage level.
• If the button displays WHITE color being pressed when battery is on, it indicates a remaining 60%-100% battery power.
• If the button displays BLUE color being pressed when battery is on, it indicates a remaining 30%-60% battery powe.
• If the button displays ORANGE color being pressed when battery is on, it indicates a remaining 0%-30% battery power ( time to charge the battery!)
• The button flashes fifteen times in mixed color to indicate that there is no power at all left in battery and it can no longer function without being properly charge.

Other important fact

• Short circuit protection - when battery is on, in case of a short circuit which usually happens if the user operates wrongly during installing a cartomizer onto the battery or connecting USB charger to the battery, the button flashes three times and stop working temporarily until the conditions causing short circuit are remove.
• Working time protection - when battery is on, in case of pressing the button non-stop for more than eight seconds, the button flashes five times and shut down the output instantly.
• Charging time - Spinner II, for its large capacity of 1600mA, requires about 5-6 hours to be fully recharged if the the battery has no power at all.

Using the battery at a higher voltage output will drain the battery faster than at a lower voltage. We suggest you to start with a low voltage and increase the voltage gradually until you find the right voltage for your atomizer/cartomizer.

 

Pictures Show :