| ≥1 piece |
Application:
PLS Series peanut butter filling machine is of wide applicability and can be used for
dosing filling of creams and liquids (20-2000cP) in the fields of daily
chemistry, food and beverage, pharmacy, chemistry and so on.
Inquire the manufacturer about other uses. Any damage due to misuse is out of
limitation of warranty of the manufacturer. Such risks shall be borne by the
user solely. Strictly following the instruments is a part of operation requirements.
Performance characteristics:
This peanut butter filling machine is of reasonable structure, reliable performance and accurate
quantification. It applies pneumatically-driven structure. The shell and all the
parts connected with filling materials are made of stainless steel (SS304 is
used for standard ones and SS316 can also be customized). The inner walls of
main parts are mirror-polished in roughness Ra0.2-0.4µm, which conforms
to the requirements of GMP certification. Therefore, It is rustless and
corrosion resistant. In addition, the user can adjust the filling volume and
speed within the type limitation as required.
Technical Data Sheet:
|
Model |
PLS-150 |
PLS-300 |
PLS-500 |
PLS-1000 |
|
Filling volume(ml) |
10 － 150 |
20 － 300 |
20 － 500 |
30 － 1000 |
|
Filling accuracy(FS) |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
|
Production capacity(cycle/min) |
1-25 |
1-25 |
1-25 |
1-25 |
|
Applicable tolerance(m³/min) |
0.1 |
0.1 |
0.1 |
0.1 |
|
Applicable pressure(Mpa) |
0.4-0.9 |
0.4-0.9 |
0.4-0.9 |
0.4-0.9 |
|
Exterior sizes (mm) |
900×280×650 |
900×280×650 |
900×280×650 |
1000×280×650 |
|
Net weight (kg) |
40 |
40 |
40 |
45 |
Descriptions :
1. This series of paste/sauce, quantitative peanut butter filling machine structure is more simple and reasonable,
high precision, the operation more easy.
2. The equipment is special turn valve control feeding and measurement, applicable to the pharmaceutical,
cosmetic, food, pesticides and special industries, is the high viscosity, paste, thick sauce with particles,
liquid to the ideal of filling equipment.
3. Department listed as semi-automatic piston filling machine, reasonable design, model compact, easy to operate.
4. Pneumatic parts with the German FESTO and Taiwan AirTac, SHAKO aerodynamic components. Material parts
contacted with 304 stainless steel material and meet the requirements of GMP.
5. Filling quantity the regulating handle, filling speed can be arbitrary regulation, can be different filling liquid products.
6. Filling it with drip tight, prevent wire drawing and lift filling device.