| ≥1 piece | 3500 |
Features: high brightness,surface,pretty good wearablity,strongforce.
thickness: 17~250 mic
width: 25~1800mm
leghth:200~300m
paper:25.4mm diameter,76mm
Scope of application
high-end print outdoor advertising painting label cable electronic products,etc
Pet thermal lamination film consists of two layers: one layer of Pet and one layer of Eva glue. The Pet film forms the harder outer surface of the film and does not melt at laminating temperature, it provides strongly and protects your laminated items. The Eva glue layer melts at laminating temperature and bonds the film onto the subject material under the pressure of the laminating rollers.
The advantage of our product
Environmentally friendly: It is environmentally friendly, non-hazardous to
Health and safe to us as no toxic gases or volatile content is emitted. Safety
in laminating process as no solvent based adhesive is used.
High function: Compared with other solvent lamination. Our film is better in
clarity and bonding strong ability of absorbing powder. It prevents lamination
from being pressed, bubbled and shredded off easily. Matt thermal lamination
film is good for spot UV and hot stamping.
Easy handling: It is easy to operate once the required temperature is met
and no special technique required.
Efficient and energy-saving: Production cost is reduced substantially as
there is no film wastage. mixture of adhesive solvent, and no UV heating lamp
is required.
Adaptable to different kinds of machines: This film is recommended to be
used in dry laminator. Small adjustments need to be made to the machine if the
film is used in wet laminator.
Process Parameter
Equipment for laminating film: dry and wet film laminator
Temperature: Normal: 85 ~ 100℃
Special: 100 ~ 110℃
Roller pressure: 10~18 Mpa
Speed: 8~50 m/min
Remarks: Special laminations refer to those with thicker ink, solid color, high
moisture content and bigger size paper.
Application manual
1. Adjust roller pressure and temperature according to different types of paper and ink.
2. When using the film for the first time or changing to other sizes, we recommend a small trial volume before going into fully mass lamination.
3. The following situation will affect the quality of the film during lamination.
a. When using metal ink
b. When the ink contains too much wax, dried oil, adhesive, and silicon additive, etc.
c. When the ink is too thick.
d. When the ink is not completely dry.
e. When the paper contains too much moisture.
f. When there is too much powder.
Specifications
|
SPCIFICATION |
KF-13 GLOSS |
KF-16 GLOSS |
KF-17 GLOSS |
KF-20 GLOSS |
KF-21 GLOSS |
KF-24 GLOSS |
KF-30 GLOSS |
|
|
THICKNESS (um) |
TOTAL |
13 |
16 |
17 |
20 |
21 |
24 |
30 |
|
BASE |
8 |
8 |
12 |
12 |
12 |
12 |
18 |
|
|
GLUE |
5 |
8 |
5 |
8 |
9 |
12 |
12 |
|
|
WIDTH |
360 390 440 540 590 780 880 1080 1320 1400 1600 1880 (or as customer's request) |
|||||||
|
LENGTH(m) |
200-3000 |
|||||||
|
PAPER CORE |
25.4mm(1 inch). 76mm(3 inch) |
|||||||
|
BONDING |
LESS THAN 2 |
|||||||
|
TENSILE STRENGTH |
MD:2.4*106 dye/cm CD:5.3*106 dyne/cm |
|||||||
Usage
Publications cover:
Magazines, books, paper bags, maps and public materials.
Package: Food, medicine, daily consumer goods.
Advertisement: Advertisement paper, board, drawing, document and photo.
Storage
The product should be stored in a dry, well ventilated warehouse. To avoid direct sunlight, the product should not be stored in the open air.
Safety Precaution
Be away from fire and heat sources. Should not be stored or transported together with chemicals and inflammables. Warehouse must be equipped with extinguishers or fire-fighting device.
Application
Production Process
Packing & Delivery
Certificate