≥1 piece |
Descriptions
The main body of SZG series double cone roating vacuum dryer is double cone Tank,inside tank, it always keeps at vacuum situstion,steam or hot heat water can be passed in jacket which can heat the internal bladder,heat through jackete passd to wet raw material,it’s makes moisture evaporated,low speed electric engine drives tank to rotate,material are moved up to down and actived inside to out outside hot area are changed instantly,meanwhile,water steam are continually drew out through Vacuum Pump and vacuum air discharge pipe, this improves the drying speed and achieves aim of average drying, it’s satisfy pharmacy management standard GMP.
Features
Drying process in vacuum environment,it has high speed under low temperature,compared to normal drying method,drying speed is improved two times,Energy are saved,heating effciency is high,this equipment especially suit for heating sensitive material and easy oxidiated.
This equipment has developed design,inside structure is simple,easy clean ,dried material can be discharged totally,operation is easy.
Sealed drying,products can not be damaged,no pollution,it’s suit for strong simulative and poisonous material.
Material is rotated and mixed to dry,this can make moisture totally dried,keeps good average condition and suit for vavious material’s requirements.
Compacted structures,small occupied area,simple operation,labor strength is reduced and saved.
Customer can select step-less regulation(1-10r/m) and step regulation (6-10r/m), it’s easy to adjust drying capacity and adopt to different requirement.
Schematic Installation
Example of installation for recommended technology: installation of solvent recover
TECHNICAL PARAMETERS
Model | 100 | 350 | 500 | 750 | 1000 | 1500 | 2000 | 3500 | 4500 | 5000 |
Name | ||||||||||
Volume inside of tank(L) | 100 | 350 | 500 | 750 | 1000 | 1500 | 2000 | 3500 | 4500 | 5000 |
Practical loading volume(L) | ≤50 | ≤175 | ≤250 | ≤375 | ≤ 500 | ≤750 | ≤1000 | ≤1750 | ≤2250 | ≤2500 |
Rotary speed(r.p.m.) | 3~13 | 6 | 5 | 4 | 4 | 4 | ||||
Power of motor(kw) | 0.75 | 1.1 | 1.5 | 2.2 | 3 | 4 | 5.5 | 7.5 | 11 | 15 |
Occupied area, LxW(mm) |
2160 x800 |
2260 x800 |
2350 x800 |
2560 x1000 |
2860 x1300 |
3060 x1300 |
3260 x1400 |
3760 x1800 |
3960 x2000 |
4400 x2500 |
Rotating height (mm) | 1750 | 2100 | 2250 | 2490 | 2800 | 2940 | 2990 | 3490 | 4100 | 4200 |
Design pressure inside of tank (MPa) | -0.1~0.15 | |||||||||
Design pressure of jacket (MPa) | ≤0.3 | |||||||||
Working temperature | (In the tank≤85) (jacket≤140) | |||||||||
Model and power of vacuum pump | SK-0.4 | SK-0.4 | SK-0.8 | SK-1.5 | SK-1.5 | SK-3 | SK-6 | SK-6 | SK-9 | SK-12 |
1.5KW | 1.5KW | 2.2KW | 4KW | 4KW | 5.5KW | 11KW | 11KW | 15KW | 18.5KW | |
Weight (kg) | 800 | 1100 | 1200 | 1500 | 2800 | 3300 | 3600 | 6400 | 7500 | 8600 |