| ≥1 piece |
I. Technical specification
Output: 6000pouches per hour
Packaging volume: 500-1000ml
Filling accuracy: Less than +/-1.5%
Packing format: Pillow pouch, three-side seal
Equipment usage condition
Ambient temperature: ±35℃, average 24-hour≤30℃
Relative humidity: 30%-85%
Altitude: ≤1500m
Packaging material
Material type: PVDC complex film (oxygen and light barrier film)
Complex layer: 3-layer or 5-layer
Material melting point Below: 160℃
Material width: （260~320）mm±1mm
Material thickness: 90µm--100µm
Inner diameter of material roll core 76mm
Electricity condition:
Power source: 3N+PN- 50Hz 380V/220V (three-phase five-wire)
Installed power: 43.43KW
Servo motor power: 0.75KW×4
Film pre-dragging motor power: 0.25KW×2
Aseptic air heating power: 3KW×3（two sets）
Hot sealing heating power: 1.6KW×2
Hydrogen peroxide heating power: 3×3KW
Blower power: 1.5KW×4
Cleaning pump: 3KW
Hydrogen peroxide pump: 0.55kW
Compressed air:
Air inlet pressure: ≥0.7MPa
Air consumption volume: 1M3/min
Filtration precision: Air source is filtrated by oil-water filter, without water or oil
Equipment dimension and weight:
Main unit: 3600×1600×2600 mm (L×W×H)
Peroxide tank: 700×550×530 mm (L×W×H)
Rinsing tank: ?580* 1200MM (Diameter*H)
Total weight : 2000KG