| ≥1 piece |
Specification :
LDPE Injection Grade
|
Tests |
Value |
Unit |
|
Melt Flow Rate (MFR) |
15 |
g/10min |
|
Density |
0.922 |
g/cm3 |
|
Tensile Yield Strength |
7 |
Mpa |
|
Elongation at Break |
75 |
% |
|
Wien Softening Point |
85 |
°C |
|
Packing |
In 25 kg PP woven bags,20MT/20’FCL |
|
LDPE film grade
|
Tests |
Value |
Unit |
|
Melt Flow Rate (MFR) |
2 |
g/10min |
|
Density |
0.9225 |
g/cm3 |
|
Tensile Strength |
9 |
Mpa |
|
Elongation at Break |
500 |
% |
|
Fish eye max(0.3-2mm) |
30 |
n/1200cm2 |
|
Stripes |
20 |
cm/20m3 |
|
Packing |
In 25 kg PP woven bags,20MT/20’FCL |
|
Application
LDPE(low density polyethylene) - is used in products and packaging such as plastic bags, Milk jugs, detergent bottles, Margarine tubs, garbage containers, water pipes, woven bag, raincoat, polyethylene monofilament, woven yarn etc.. LDPE resins are made by high pressure autoclave process and mainly used for blown film extrusion and wire coating (cable sheath) etc.. They are widely used for applications for general purpose packaging films, heavy duty bags, shrink films, and foams