| ≥1 piece |
New model full automatic Walnut shelling machine
Introduction of walnut shelling machine:
1.This walnut shelling machine is mainly applied to remove the hard shell of the walnuts, according to the walnut of varieties, production and nuts the integrity rate of the different. One of the structure is throug control the motor speed, make motor speed is suitable for the size of the internal wind, the other is by adjusting the internal clearance. So that reach to the best shelling effect.
2.Walnut shelling machine is consisted by four parts, that is frame, hopper, roller, and discharging mouth.Just as in the picture you can see. The production and unbroken ratio rangers according to different kinds of walnuts, the optimum effect can be realized by means of controlling the regulator and the force of air inside the machine. The walnuts are fed into the machine from the top and being shelled inside the machine and discharged out afterwards.
The outstanding advantages of walnut shelling machine:
1. Most advanced designed walnut shelling machine, to make sure the walnut will be broken
to remove the shell easily and not hurt the walnut kernel.
2. Low damage rate.
3. High shelling rate, can reach to over 99%, almost 100%.
4. Very good quality, suitable to various sizes of walnuts.
Main technical parameter of walnut shelling machine:
|
Model |
TZ-1 |
TZ-2 |
|
Power |
1.1 k w |
3KW |
|
Voltage: |
380 V |
380 V |
|
Production capacity: |
300kg/h |
800kg/h |
|
Ratio of unbroken: |
80-90 % |
80-90% |
|
The outsize |
1.3*0.8*1.5m |
1.8*0.95*1.65m |