| ≥1 piece |
|
Dear friends , welcome to our company site !
JD series automatic bottle blowing machines characteristics 1. High speed stretch plastic bottle blow molding machine(professional efficient) 2. 7600-8000pcs/h 4. Adjust infrared heating lamps based on touch the temperature, the operation is simple, convenient, strong penetrating power, bottles of embryo heated, heating uniform, rotating rapid and stable.
JD-08X Main technical parameters
|
|
Dear friends , welcome to our company site !
JD series automatic bottle blowing machines characteristics 1. High speed stretch plastic bottle blow molding machine(professional efficient) 2. 7600-8000pcs/h 4. Adjust infrared heating lamps based on touch the temperature, the operation is simple, convenient, strong penetrating power, bottles of embryo heated, heating uniform, rotating rapid and stable.
JD-08X Main technical parameters
|
|
Dear friends , welcome to our company site !
JD series automatic bottle blowing machines characteristics 1. High speed stretch plastic bottle blow molding machine(professional efficient) 2. 7600-8000pcs/h 4. Adjust infrared heating lamps based on touch the temperature, the operation is simple, convenient, strong penetrating power, bottles of embryo heated, heating uniform, rotating rapid and stable.
JD-08X Main technical parameters
|
Dear friends ,
welcome to our company site !
JD series automatic bottle blowing machines characteristics
1. High speed stretch plastic bottle blow molding machine(professional efficient)
2. 7600-8000pcs/h
3. Accessories for the world famous brand is more than 90%
4. Adjust infrared heating lamps based on touch the temperature, the operation is simple, convenient, strong penetrating power, bottles of embryo heated, heating uniform, rotating rapid and stable.
JD-08X Main technical parameters
|
Composition |
Project |
Technical parameters |
|
Products conditions |
Products maximum volume(ml) |
600mL |
|
Products maximum diameter (MM) |
Φ70 |
|
|
Products size bottle (MM) |
Φ12 ~ Φ38 |
|
|
Products maximum height(MM) |
<240 |
|
|
Suitable for embryo tube maximum height (MM) |
<115 |
|
|
Shut the mould trip |
82 mm |
|
|
Bottom-formwork trip |
50mm |
|
|
Bottle spacing (MM) |
76.2 |
|
|
Mouldstandardthickness (MM) |
168 |
|
|
Production capacity (bottles/hour) |
7,600~8,000 |
|
|
Mold cavity number |
8 |
|
|
Heating part |
Heating unit |
4 |
|
Heating lamp layer |
6 |
|
|
|
Germ tubes seat number (a) |
114 |
|
Electrical parameters |
Voltage |
220/380V |
|
Frequency |
50/60Hz |
|
|
Use power |
24~28.8kw/h |
|
|
Installed power |
50.5kw |
|
|
Air (High-pressure gas consumption PET bottle volume on and calm) |
Low voltage compressed air pressure |
8~10bar |
|
Low voltage compressed air gas consumption |
2.0~2.5m 3 /min |
|
|
High-pressure compressed air pressure |
26~35bar |
|
|
High-pressure compressed air gas consumption |
3.6~4.2m 3 /min |
|
|
Cooling water |
Pressure |
3~4bar |
|
Cooling water (temperature≤18 °C ) |
Temperature |
5m 3 /h |
|
Weight |
Host\Heating machine\Body,etc |
7T |
|
Equipment configuration dimensions |
Sixe (L×W×H) |
4850mm×2150mm×2100mm |
|
Richard embryo machine (L×W×H) |
2550mm×2120mm×2900mm |