| ≥1 piece |
Peel strength and tensile tester measures the strength of heat seals formed between thermoplastic surfaces immediately after the seal has been made and before it cools to room temperature. Hot Tack tester is especially important for vertical form-fill-seal packaging.
Peel strength and tensile tester Features
1. Hot tack, heat seal, peeling and tensile test items are integrated in one instrument
2. Sealing jaws are controlled by P.I.D. temperature. Temperature rises fast to set temp and keeps stable
3. 7 inch TFT touching screen for easy operation
4. PLC control
5. Aluminum encapsulated sealing jaws for average heating
6. Multi-group parameter saving
7. Any testing speed adjustable
8. Auto zeroing, overload and over travel protection
9. Manual and foot switch starting test, anti-scald design
10. RS 232 port and professional software
Peel strength and tensile tester Technical Specifications
|
Items |
Parameters |
|
Sealing Temperature |
Ambient ~ 250 ℃ |
|
Temp Accuracy |
±0.2 ℃ |
|
Heat Seal Dwell Time |
0.1~9999s |
|
Hot Tack Dwell Time |
0.1~9999s |
|
Sealing Pressure |
0.15MPa ~ 0.7MPa |
|
Sealing Jaws |
50mmx10mm Teflon Coated |
|
Sealing Jaws Heating |
Double Heating |
|
Load Cell |
200N(Optional:30N50N100N500N ) |
|
Accuracy |
0.5 F.S. |
|
Resolution |
0.01N |
|
Stroke |
500mm |
|
Gas Source |
0.5MPa ~ 0.7MPa |
Hot Tack Tester Standards