| ≥1 piece |
Henan Yuanda Boiler 1 ton of fuel boilers use features:
1, when the force of raising the pressure to 2 kg ( cm 2 ) gauge , the gauge rinse water trap .
2, when the force of raising the pressure to 3 kg ( cm 2 ) gauge pressure, the pressure receiving member to check whether the leakage of the connection , loosening of the screws and tighten over time . In order to prevent the screws off, force should not be too much longer handle the method does not allow the fastening screws .
3, when the pressure to 4 kgf ( cm 2 ) gauge pressure, once the sewage to balance the various parts of the boiler water temperature. Advanced high level before the sewage water , sewage observe the situation around when sewage pipes , and the water level observed at any time after shutting sewage discharge valve , and check for water leakage.
4 , when the pressure rose to two-thirds of the working pressure , the tubes were warm (warm tube purpose : to make steam pipes, valves, flanges and so slowly heated and subjected to a uniform condensation of water to put inside the tube to prevent the pipeline water hammer occurs leakage , etc. warm tube for about half an hour or so ) operation
Product range:
Steam boiler : evaporation 1-20t / h, pressure 0.7-1.6MPa
Hot water boiler : for heat 0.7-14MW, pressure 0.7-1.25MPa
Applications:
1 chemical industry , plastics industry, coatings and automotive, industrial bitumen ,
2 construction equipment industry, shipbuilding industry
3 clothing garments, washing and ironing ,
4 pharmaceutical industry , biotechnology, food industry
5 sauna beauty , hotels , sports and fitness , offices and schools
6 science experiments
skype :henanyuandaboiler