Bucket elevator,China price supplier

Bucket elevator USES and characteristics
TH, the HL type chain hoist a type used in vertical transportation grinding cut larger powder, and small block of granular materials, such as food, coal, cement, crushed ore, etc, and the conveyance height 40 m, the highest features as its simple structure, smooth movement, draw out take type material, with hybrid or gravity unloading, rim combined sprocket and easy to change, chain by the special processing long life, the lower the gravity automatic tensioning devices can keep constant tension, avoid skid or take off at the same time in the chain, hopper, have certain sues let performance enough effectively protect moving parts, materials, no more than 250 Degrees Celsius. TH JB3926-85 "type according to a vertical type hoist" standard design and manufacture, should first choice. A type of HL hoist connection size and chain and sprocket wheel, a device is equal, namely reliability of TH with TH type. At the same time, a type D production TD pattern Lift machine.

The use and maintenance
A. This machine is in the process of operation fixed personnel should be supervised. Watch the personnel must with a general knowledge and technology to be familiar with the performance of the machine.
B. The machine (the use of the characteristics of the materials to be conveyed, working condition and throughput, etc. ) shall strictly abide by all the rules of this manual.
C. Use the unit to the machine should draw up the equipment maintenance, repair the rules for safe operation of personnel in custody to obey. Watch the personnel must have relief system, carefully check the hoist the work situation.
D. Should have fixed feeding device to machine evenly in feeding. Feeding device of feeding capability should be in this manual "ascension machine main technical specifications" listed in the throughput scope, can not give too much and make the material conveying material section is blocked.
E. At work, all doors must fully closed. In the lower section, and often open door is in the review should be set the appropriate lighting equipment. In the process of work breakdown, must immediately stop operation, and eliminate the fault. If there is unfavorable to eliminate the defects, but immediately to work and have no too much influence, should make records to eliminate maintenance.
F. Over personnel should always check each part of work, but it is forbidden in operation of the machine part of sports cleaning and repair. The lower section of the spiral tension device should be adjusted is appropriate, keep tape has a normal work of tension. Watch personnel should often observed the tape, hopper work should be removed to the damage of the hopper.