champagne electrophoresis aluminium profile,China ZHONGJI price supplier

ZHONGJI ALUMINIUM

 

If your profile require good quantity, We will do free moulds for you

1). Aluminium profiles for architecture

      

      a). Aluminium profile for door and window

      b). Aluminium profilet for curtain wall

      c). Aluminium profiles for louver / shutter

      d). Aluminium profile for handrail and barrier

       e). Aluminium profile for decorations,

       f). Aluminum profile with thermal barrier strip,

       g). Aluminium tube, square pipes and “U”/ “I”/”L” profile

       h). Aluminium sheet for roof tile, ceiling, curtain wall etc.

       i). Other custom design aluminium products.

 

2). Aluminium profiles for industry

       a). Heat sink for lighting, speaker, & other electrical equipment.

       b). Furniture parts , ladder, mounting bracket/frame for bike etc.

       c). The other custom deisng aluminium extrusion products.

  

B.  Technical parameters

 

1.General Chemical Composition of the aluminum Alloy
Aluminum Grade	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	impurity	Al
6063	0.2-0.6	<0.35	<0.1	<0.1	0.45-0.9	<0.1	<0.1	<0.1	<0.15	Rest
6061	0.4-0.8	0.7	0.15-0.4	<0.15	0.8-1.2	0.04-0.35	<0.25	<0.15	<0.15	Rest
2.Mechanical Properties of Sections under Room Temperature
Aluminum Grade	Temper	Wall Thickness	Resist Pull Point(Mpa)	Stretch (Rpo.2 Mpa)	Stretch Rate	Webster  Hardness
6063	T5	All	160	110	8	8
	T6	All	205	180	8
6061	T4	All	180	110	16
	T6	All	265	245	8
3.SurfaceTreatment of Sections
(Class)	(μm),not diminish than		acid-resistant			abrasion resistance
	(Min-average film  thickness)	(Min-part film  thickness)	CASS		(S)	(f, g /μm)
			(h)	Class
AA10	10	8	16	≥9	≥50	≥300
AA15	15	12	32	≥9	≥75	≥300
AA20	20	16	56	≥9	≥100	≥300
AA25	25	20	72	≥9	≥125	≥300

 

  

 

  

A.Terms & Conditions of Trade:

 

  1). Payment term: T/T, 30% down payment, & the balance to be paid off before delivery.

  2). Settlement term: charge by final actual weight or by theoretical weight as per drawings .

  3). Delivery Date:

        a). Die/Mould: 7 to 10 days after down payment & drawings are confirmed.

         b). Goods: 10 to 15 days after sample confirmed & down payment.

 

 

  

  

1). Date of found: year 2010.

2). Factory area: cover an area more than 800,000 sq.m.

3). Employee: More than 1,000 employee, & more than 10% of them technologists.

4). Machine & Capacity:

     a). Extrusion line: 12 of 600-2500 tons imported extrusion lines, annual output capacity is more than 60,000 tons.

     b). Harni(Japan) anodized & electrophoresis lines.

     c). Korea imported electrophoresis lines.

     d). CNC color anodized system

     e). Korea imported wooden gained lines

     f). Switzerland imported . thermal barrier aluminium profile lines.

     g). WAGNER (Germany imported) powder coating & PVDF lines etc.…