colloid mill,China xuanchen price supplier

product details

Model No:JM

Origin:China

Brand:xuanchen

Overview

Colloid mill can be divided into stainless steel colloid mill and half-formed stainless steel colloid mill. The basic principles is when fluid and semi-fluid material go through the fixed gear and moved gear which is high-speed relatively linked, can be influenced by strong shear, friction and high-frequency vibration, and be effectively crushed, emulsified, homogenized. So that precision products can be made.

Classification

1. According to Structure: there are Vertical Colloid Mill and Split Colloid Mill

2. According to Angle of Appearance: there are Ordinary Colloid Mill and Sanitary Colloid Mill

Structure

The main structures of colloid mill are grinding parts, the base transmission department and dedicated motor. The dynamic and still millstones in the core part and mechanical seal parts are the most key parts. Therefore, according to the different natures of the materials, the selection must be different. But the materials are made of stainless steel or specific materials. The motor need to be designed specifically, depend different model. The motor flange should install retaining plate to prevent leakage.

Usages

1. Food Industry: dairy products, chocolate, soy sauce, jam, Peanut Butter, butter and beverage

2. Chemical Industry: paints, lubricating oil, spices, dyes, emulsified asphalt, emulsified rubber, catalyst, paint coating etc.

3. Pharmaceutical Industry: cod liver oil, athlete cream, bee honey, pollen etc.

4. Daily Chemical Industry: shoe polish, toothpaste, cosmetics, balsam, soap, and detergent, etc

5. Other Industry: building industry, paper industry, plastic industry, battery industry, etc

Characteristics

Relative to the pressure-type homogenizer, colloid mill first is a kind of centrifugal equipment. It has the advantages of simple structure, convenient maintenance and is suitable for high viscosity materials and large particles materials. Also, its main drawback is determined by its structures. First, as for the centrifugal movement, the flow is not constant, corresponding to viscous material, the flow vary greatly. For example, the same equipment, in dealing with viscous lacquer and thin dairy fluid, the flow speed can differ 10 times above. Second, because of the high-speed friction between the stator and material, it is easy to generate large quantity of heat, and make the material processed. Third, the surface is easy to wear, and after wearing, the refined results will be significantly reduced.

Technical parameters

Model

JML-50

JML-80

JML-100

JML-120

Emulsification fineness um ( single cycle or multi -cycle)

5~40

3~40

2~40

2~40

Adjustment range mm

1-0.01

1-0.01

1-0.01

1-0.01

Output t/h change according to materials

0.01-0.2

0.3-1

0.5-2

0.7-3

Motor

Power kw

1.1

3

5.5

7.5

Pressure v

380

380

380

380

Stirring speed r/min

2880

2880

2880

2880

Grinding diameter mm

50

80

100

120

Discharge port diameter

15

25

32

40

Cooling water pipe

1/8"

1/4"

1/4"

1/4"

Dimensions

Length mm

420

520

560

560

Width mm

280

400

420

420

Height mm

760

900

950

950

Weight kg

45

84

113

135

Model		JML-50	JML-80	JML-100	JML-120
Emulsification fineness um ( single cycle or multi -cycle)		5~40	3~40	2~40	2~40
Adjustment range mm		1-0.01	1-0.01	1-0.01	1-0.01
Output t/h change according to materials		0.01-0.2	0.3-1	0.5-2	0.7-3
Motor	Power kw	1.1	3	5.5	7.5
	Pressure v	380	380	380	380
	Stirring speed r/min	2880	2880	2880	2880
Grinding diameter mm		50	80	100	120
Discharge port diameter		15	25	32	40
Cooling water pipe		1/8"	1/4"	1/4"	1/4"
Dimensions	Length mm	420	520	560	560
	Width mm	280	400	420	420
	Height mm	760	900	950	950
Weight kg		45	84	113	135