| ≥1 piece |
This extracting Tank is used to extract tea from the tea leaves, or make medicine from herbal medicine.
All the tank wall is made of high quality SUS304-2B stainless steel, the jacket adopts high density of PU as insulation and was made out of new procedures; this tank can use steam to heat the product inside with steam or hot water inside of the dimple pad; the paddle type agitator is mounted from top at the centre; other standard attachments such as: airtight manhole, high and low level probe, temperature sensor, the extracted liquid product is discharged from bottom outlet; dregs are also discharged from bottom where a net is fixed to separate the dreg from the liquid product; the top cover is elliptical type and bottom base is of conical types
|
Model |
(L) Diameter |
（D） External diameter |
（H） Height（mm） |
PU Insulation（δ） |
Jacket（δ） |
Diameter of inlet/outlet |
|
BYDG-500 |
φ500 |
800 |
2140 |
50 |
1.5 |
φ38 |
|
BYDG-1 |
φ1000 |
1050 |
2380 |
50 |
1.5 |
φ38 |
|
BYDG-1.5 |
φ1500 |
1180 |
2550 |
50 |
1.5 |
φ38 |
|
BYDG-2 |
φ2000 |
1340 |
2760 |
50 |
1.5 |
φ38 |
|
BYDG-2.5 |
φ2500 |
1420 |
2940 |
50 |
1.5 |
φ38 |
|
BYDG-3 |
φ3000 |
1540 |
3050 |
50 |
1.5 |
φ38 |
|
BYDG-4 |
φ4000 |
1650 |
3200 |
50 |
1.5 |
φ38 |
|
BYDG-5 |
φ5000 |
1780 |
3250 |
50 |
1.5 |
φ38 |