≥1 piece |
Cheap RC quadcopter, Buy Quality QuadCopter ARF directly from China 4 axis copter
Total items include:
Tarot SK450 Multi-Rotor Air Frame, FlameWheel KIT TL2749-02
increasing the sponge ball direction.
KKMulticopter v5.5 Circuit board V2.3 + ESC Board + Programmer Firmware Loader USB *1 set
For the program method,please contact me:
JMT 11.1V 2200mah 20c lipo battery *1
T6EHP-E 2.4G 6Ch Transmitter and 7ch Receiver *1 set
Relate wire
charger+adapter * 1 set
Buyer need to assembly the copter by yourself.
A 2212 A2212 1000KV Brushless Outrunner Motor W/ Mount *4pcs
Including: 1 set 2212 1000KV Brushless Outrunner Motor with Mounts *4
DT-30A ESC Speed Controller *4 pcs
1 Specification
1.1 Output: Continuous 25A, Burst 40A up to 10 Secs.
1.2 Input Voltage: 2-4 cells lithium battery or 5- 12 cells NiCd/NIMh battery.
1.3 BEC: 3A
1.4 Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrushLess Motor)
1.5 Size: 45mm (L) * 25mm (W) * 11mm (H).
1.6 Weight: about 25g.
2 Features
2.1 Safety Arming Feature: Regardless the throttle stick position, the motor will not spin after battery connected.
2.2 Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.
2.3 Programmable Items: Brake Setting: brake enabled / brake disabled. Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd). Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power. Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high. Start Mode: normal / soft / very soft. Timing: low / medium / high. Reset: reset all the programmable items to their default settings.
2.4 Full Protection Features: Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection.
11.1V 20C 2200Mah Lipo Battery *1 pcs
Specification:
Output:11.1V(3S1P)2200mAh
Weight About:193g
This Li-poly battery features high efficient and high discharge,use a inspection machine to match packs, suitable for All Align trex 450 rc heli and other professional model airplanes, cars, and guns.
Max Continuous Discharge: 10C, Burst Discharge: 15C. Normal operating temperature is approx. 40-65°C(within 80% of rated discharge). Max. temperature: 80°C.
NOTE:
When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Discharging capacity can't exceed 80% of the max capacity after full charging to ensure a good cycle performance. Recommend to full charge a brand new battery before using and only discharge the battery 50% for first 5 times to make a good efficiency of the battery. Please make it a habit to always count time for flight, or please set a low voltage protection on ESC (Cell voltage after stopping using can not lower than 3.2V). Do not use the battery at insufficient of voltage.
Do not expose batteries to sunshine or store/ charge batteries at the temperature up to 35°C in a airtight car. The environment high temperature could cause the damage or the danger of burst. If the battery becomes hot while high current discharging or flying,
please do not charge the battery immediately. Wait to cool down(about 20 mins), then inspect to recharge. If against follow the original factory using rules, possibly cause the battery to inflate or any dangerous accident happens.
Tarot 1045 5mm Efficient/Hardness Blade Propeller TL2710-01/TL2710-03 (2 pairs)
(For the color of propeller,we will ship random color according to our invertory)
Transmitter& Receiver:
Effect diagram (assembly required buyers):
(buyer need to assemble by himself)
the adapter based on the stock of the factory , may have some different from the picture , but the funcetion and the quality is the same , if you have any requist , pls contact us in advance
F02113-A RC 4Axis QuadCopter UFO ARF/RTF include :
Tarot SK450 Multi-Rotor Air Frame, FlameWheel KIT
A2212 1000KV Motor installed base*4
JMT 25A ESC*4
V2.3 Circuit board*1
ESC board*1
Programmer Firmware Loader USB*1
Black color Propeller*2 pair
Wheelbase: 17.7in/450mm
Net weight: 0.65lb/282g
Made by advanced engineering material,super strong & smooth
Kit(need you assemble yourself)
100% DJI Brand new
(Please pay attention this:
The Radio Controller Software upgraded,The wire connecting for Receiver and KKMulticopter board has been changed.Please check and like this:)
Model Number: |
F02113-A
|
Features: |
Remote Control,Model
|
State of Assembly: |
Almost Ready
|
Age Range: |
Grownups
|
Motor: |
Brushless Motor
|
Controller Mode: |
MODE1,MODE2
|
Remote Distance: |
about 200meters
|
Power Source: |
Electric
|
Control Channels: |
6 Channels
|
Feature: |
No assembly,RTF
|
Package: |
Carton box
|