| ≥1 piece |
Application
This packing machine is mainly designed for packing fine powder materials that easy dusty and for high precision packaging requirements. The computer will make comprehensive analysis according to the weight sensor signal and command to complete the bag clamping section elevating, two-speed filling, weighing metering, bag release and bag transportation and so on.
After manual bag putting ready, the bag clamping section will rapidly rise to the set height (due to the auger tube is not moving, then the bag bottom to auger tube discharging spout just over 10 cm around in height, blanking effectively prevent dust that due to high fall caused dust and spray material), during fast feeding, the bag clamping section will slowly decline and still keep the over 10cm blanking height, when turn into the slow feeding process, the bag clamping section will nearly down to the set position. Because the materials fall height is short, the balance amount is very small too, that greatly improving the weighing and packaging accuracy. After the weighing finished, it automatically release the bag, meanwhile, the bag holding section will hold the bag to prevent the dumping of the bag, and the bag conveyor start to transport the bag away, then the bag holding section will loosen the holding arms and reset, and then the conveyor stop, enter the next weighing packing cycle. This packing machine is very suitable for packaging additives, Toner powder, carbon black powder, dry powder, fire extinguishers powder, other ultra-fine powder, and other powders that needs high-precision packaging requirements.
To see more about our machine video on Youtube:
https://www.youtube.com/channel/UCg94kU3IB6c_co4waj6xb5A
Main technical data
|
Packing weight |
5kg - 25kg |
|
Accuracy |
1 – 20kg ≤±0.2%;>20kg≤±0.1% |
|
Speed |
1-3 times/min |
|
Power supply |
380V 50/60Hz |
|
Compressed air |
6kg/cm2 0.1m3/min |
|
Power |
4.0 kw |
|
Self weight |
650kg |
|
Size |
1200(L)×1650(W)×2950(H) mm |
|
Storage hopper volume |
125 L |
Main features
1. Pneumatic bag clamping device and the bracket mounted on the weight sensor, do the fast and slow filling according to pre-set value, high response speed of the weighing system to ensure the high packaging accuracy.
2. The electromechanical lifting mechanism drive the bag clamping section lifting and down, lifting speed adjustable, no dust during filling, well protecting the environment.
3. PLC control, touch screen display, easy to operate. All settings could be adjustable easily as per needs.
4. It adopts different construction materials as per different requirements and different materials to suit a variety of needs. Open type hopper structure, very easy to clean.
5. Inverse rotary dial feeding mechanism to keep the material in the silo is always in an active state, the material accumulation symmetry, uniform feeding to ensure the feeding precision.
6. The fixed screw installation structure will not affect the material properties during filling.
Work flow
Manual bag putting and bag clamping → the bag clamping device rises up → fast filling and the the bag clamping section decline → the weight coming to pre-set value → slow filling → the weight achieve the target value → automatic release the bag ( the bag holding section act arms to hold the bag)→ bag conveyor start(transport the bag away)→ the bag holding arms loose and reset→ bag conveyor stop→ enter next cycle.
Our Service for you:
We always aim to best serve our clients’ needs. So we promise the following clauses on condition of establishing business relationship with you.
1) The machine shall be guaranteed by the seller against poor materials, poor performance and poor workmanship for a period of one year from the date of commissioning. During this guarantee period, the seller will provide the buyer with free maintenance and free spare parts that caused by the machine’s quality upon receipt of advice.
2) The seller will supply repair service for three years on condition that the buyer takes on all costs of the broken parts.
3) The seller will supply the buyer the guide service on the operation of the machine.
4) The seller will respond within 2 hours if the machine goes wrong in production.
5) If required, the seller will dispatch technician to buyer’s country for installation guide, commissioning & adjusting the machine and training the workers on condition that the buyer affords all the cost from China to the buyer’s company including food, accommodation, transportation, etc. and extra USD90.0 per day per person for the service.
If any interest, please contact me!
Contact: EuniceE-mail: eunice at go2mj dot com
Tel: 86-18068286380
Skype: eunicemengmengkp
QQ: 975326099