| ≥1 piece |
For Large Volumes to 6" (152mm)
SP-0
Gilson's patented combination of adjustable chutes and gate release hoppers assures top accuracy for mixing and reducing gross samples to representative smaller test quantities. Universal Splitters are convenient, space-saving, and cost-effective. A single model serves the purpose of two or more conventional splitters. Larger SP-1 and SP-0 models offer large capacities not available from other sources. Since the hoppers have a gate release, only the included sample collecting pans are necessary for proper use; but extras are available. Models SP-3, SP-2.5, and SP-0 have 60?chute slopes; other models have simple, inexpensive Adapter Kits to convert standard 45?chutes to 60?when necessary for flowability or to meet specifications (recommended for coal and coke). Models SP-2.5 and SP-3 are mostly of stainless steel; other models are heavy-gauge painted steel which has been forced air dried.
The Universal chute section is comprised of a set of aluminum bars of precise width that pivot about a rod through their lower ends. Top of bar ends are flipped to alternate sides to form desired width chutes, as determined by number and width of bars grouped on each side. Groupings that result in an equal number of chutes to either side may be used (See table of options for each model). Once set, bars are held tightly together via wing nuts on threaded ends of the pivot rod.
Field aggregate samples up to 400 lb (182kg) (ASTM D 75), raw coal samples to 300 lb (136kg) (ASTM D 2234), and other samples of large volume and large particle size can be reduced accurately with this rugged divider. Two pans on each side receive the split sample, and an optional Lift Cart is available for moving/dumping pans. Material in both pans on a side are treated as a single sample.
SP-0 Shown with SPA-450
$2,022.00