| ≥1 piece |
Plate heat exchanger is the ideal equipment for heat exchange of liquid to liquid, or liquid to steam. And it is featured by high efficiency, small heat waste, compact and light construction, small floor space, convenience to install and clean, wide range of application, long service life and so on.
In the situation of same pressure loss, its heat transfer coefficient is 3-5 times higher than that of tubular heat exchanger, and with the floor space 1/3. Its heat recovery rate is up to above 90%.
Plate heat exchanger is widely used in metallurgy, petroleum, chemical industry, food, pharmacy, shipping, textile, papermaking and so on. It is really a good equipment for heating, cooling, heat recovery and fast sterilization.
Main technology parameters
Specification BR 0.05 BR 0.1 BR 0.2
Monolithic heat
transfer area (2) 0.05 0.1 0.2
Slab size( mm) 500?¨?é168 660?¨?é250 970?¨?é330
Slab thickness(mm) 0.8 0.8 0.8
Angle hole dia(mm) 38 60 75
Pipe fittings dia(mm) 28 38 46
Corrugation shape Herringbone corrugation
Corrugation spacing (mm) 10 12 12
Average board
Spacing (mm) 3.8 4.2 4.2
Combined heat
exchanger area(2) 0.5~5 4~10 10~38
Maximum working
Pressure (mpa) 0.4~2
Upper limiter of
working temperature (c) Commonly about 120~160c ,Particularly can be 250c
heat transfer
coefficient (W/m2 c) 2000~6000