This oil making machine consist of oil press head,motor,oil filter pan,vacuum pump and machine structure. Which can press much kinds of oil material,like peanut,sesame,soybean,flaxseed,Rapeseed,olive seeds,plum seeds etc.
Technical Parameter :
1. Easy operating and small size, saving land, labor and energy consumption
2. Big pressing force in the chamber, making high oil output
3. Long-term continuous work, bring better economic benefit to user
4. Good quality and long durability, made of the most suitable material with refined treatments to ensure more than 10 years using
5. Wearing parts can be dismountable
6. Different design in squeeze chamber for both cold and hot pressing
7. Multi-function combined auto-temperature control and oil vacuum filter
8. Bevel gear technology make good performance when operating
Working Principle :
1. Transferred by the triangle belt, the electromotor drives the spiral shaft.
2. The oil plants falls into the first section of the spirals through the feeding part and being carried toward the end of the machine along with the rotating squeeze spirals.
3. As the space between the squeeze spirals are getting smaller, the oil plants frictions with each other as well as the squeeze spirals and the squeeze loops. The pressure in the chest is becoming bigger.
4. During this process, the oil plants are smashed and big amount of heat is generated, the tissue cells are destroyed and the oil is separated from the oil plants and flow out from several outlets.
5. After extracted, the oil plants turns to be cake containing low oil and discharged in thin slices from the end of the machine. The whole oil and residue separation process is completed.
FAQ
Q1: which part can be changed 304 stainless steel?
A1: Feeding bucket, outsourcing, rack, lower hopper, oil pan, control cabinet.
Q2: Can i change the Voltage?
A2: Three-phase power, can not be changed to single-phase power, but the voltage and frequency can changed.
Q3: waht is the machine material?
A3: Overall is spray painted carbon steel, and the pressed screw, pressed bar material is Cr20.
Q4: what is the slag oil content?
A4: Generally, the hot residue has an oil content of 6-10% (according to the appropriate temperature of the press).
Q5: how is the cake thickness?
A5: 0.5-21mm with smooth slag.
Q6: what is the requirement of material Oil and water content?
A6: Oil content ≥8%, 5% ≤ water content ≤10%.
Q7: oil weight of each KG Formula?
A8: Material oil content * dry material weight * 92% = oil weight.
Q9: why No oil or low oil yield?
A9: The material is not wet or too dry, the oil drain is blocked by the oil slag or the squeezer is too tightly assembled.
Q10: what is the operating temperature?
A10: 1. Cold-pressed oil needs 2-3 times of pressing, oil temperature (below 100 degrees Celsius).
2.hot-pressed need once, oil temperature (130-145 degrees Celsius).
Q11: what is the avocado oil extraction process?
A11: Avocado cleaning--nuclear--slicing--drying--oil extracting.
Q12: Special Notes?
A12: Hot squeeze 130-145 degrees Celsius.