≥1 piece |
The Garlic Peeler is specially designed for peeling garlic. with the advantage
of high efficiency, low breakage ,easy to operate and peeling automatically and
naturally .
Garlic cloves are in the storage tank. Hot air drying garlic skin can reach about
40 ℃, feeding cylinder, open the feed control valve, the garlic cloves get into the
peeling cylinder. The amount of the feed depends on the opening time of the
feed valve, and garlic split extent, after the end of the feed, the feed port is
closed, compressed air electromagnetic is working, the compressed air enters
the peeling cylinder with peeling , and garlic in the high-speed gas stream is peeling ,then garlic peels get out through the skin hole,
garlic skin and garlic are separat ed , the Peeling work is completed . After
the peeling work, then discharge cylinder begin to work , the already peeled garlic come out from the discharge port.
Both the material of barrel and the cover are made of stainless steel, confirming
to the hygienic standards by the state.
Model |
GLRY-100 |
GLRY-200 |
GLRY-300 |
Capacity |
100kg/h |
200kg/h |
300kg/h |
Input voltage |
220v,50hz |
220v,50hz |
220v,50hz |
Total power |
1700w |
3200kw |
4700kw |
Electric heating |
1500w*1 |
1500w*2 |
1500w*3 |
Flow into the gas source |
1.05m3/min or 7.5kw air compressor |
1.6m3/min or 11kw air compressor |
3.5m3/min or 18.5kw air compressor |
With the air pressure |
10kg/cm2 |
10kg/cm2 |
10kg/cm2 |
Dimension |
60*60*135cm |
6 5 *9 5 *1 7 5cm |
8 5 *8 5 *1 6 5cm |