| ≥1 piece |
Over View of Jaw Crusher :
Jaw crusher is also named jaw breakers , rock crusher , or rock breaker . Jaw crusher is mainly used to primarily and secondarily crush many kinds of mining rocks, and the highest anti-pressure strength of crushed material is 320Mpa. Our design and production of jaw crusher are of high position both domestic and overseas.
Features of Jaw Crusher:
01. Simple structure, reliable working condition, easy maintenance, low operating costs;
02. High crushing ratio, even final partical size products ;
03. Deep broken cavity, no dead zone, increased capacity ;
04. Safe and reliable lubrication system, convenient replacement parts ;
05. S tand-alone energy-saving 15% ~ 30% ;
06. The discharging size of jaw crusher can be adjusted to meet the users' different requirements .
Structure of Jaw Crusher:
The structure of jaw crusher : main frame, eccentric shaft, a large belt pulley, fly wheel, swing jaw, side guard plate, toggle plate, Rear bracket, adjust gap screw, reset spring, and fixed jaw and swing jaw board etc., and the toggle plate also plays a role of protection.
Working Principle of Jaw Crusher:
The motor drives the movable jaw plate to do periodic motion towards the fixed jaw plate by the eccentric shaft. The angle between toggle plate and movable jaw plate increases when movable jaw plate moves . So the movable jaw plate moves towards the fixed jaw plate. The material between the movable jaw plate and fixed jaw plate will be crushed in this process. The angle between toggle plate and movable jaw plate decreases when movable jaw plate moves down, the movable jaw plate moves leaves fixed jaw plate by pulling rod and spring, the final crushed material will be discharged from the outlet.
Technical Data of Jaw Crusher:
|
Model |
Feeding Opening Size (mm) |
Feeding Size (mm) |
Adjustable Range of Discharge Opening |
Capacity (t/h) |
Motor Power (kw) |
Overall Dimension (mm) |
Weight (t) |
|
PE150 × 250 |
150 × 250 |
<125 |
10-40 |
1-3 |
5.5 |
896 × 745 × 935 |
0.6 |
|
PE250 × 400 |
250 × 400 |
<200 |
20-60 |
5-20 |
15 |
1150 × 1275 × 1240 |
2.8 |
|
PE400 × 600 |
400 × 600 |
<350 |
40-100 |
15-60 |
30 |
1700 × 1732 × 1653 |
6.5 |
|
PE500 × 750 |
500 × 750 |
<425 |
50-100 |
50-100 |
55 |
2035 × 1921 × 2000 |
10.3 |
|
PE600 × 900 |
600 × 900 |
<480 |
65-160 |
60-130 |
75 |
2290 × 2206 × 2370 |
16.5 |
|
PEX250 × 750 |
250 × 750 |
<210 |
25-60 |
10-40 |
22 |
1667 × 1545 × 1020 |
5 |
|
PEX250 × 1000 |
250 × 1000 |
<210 |
25-60 |
15-50 |
30 |
1550 × 1964 × 1380 |
6.5 |
|
PEX250 × 1200 |
250 × 1200 |
<210 |
25-60 |
20-60 |
37 |
1560 × 2104 × 1415 |
7.7 |
Notice: Any change of Jaw Crusher technical data shall not be advised additionally.