lollipop plastic stick for filling,China Kastar price supplier

lollipop plastic stick for filling                                                              

                                                                                              

PRODUCT DESCRIPTION:

 

Kater pu foam is cost-effective with high-dimensional stability and strong bonding or big bubble bolum, its initial bubble is very good and the last bubble is smaller. The cured foam is very good for low temperature resistance and seasonal applicability. The bubble formation is flexible with more pressure resistance. It is used preferably for insulation and installation in the construction sector application can be filling cavities, break-throughs, cracks and gaps, sound and heat insulation bonding fixing mounting, etc.

 

APPLICATIONS AREAS:

 

1. Installing, fixing and insulating of door and window frames.

2. Filling and sealing of gaps, joint, openings and cavities.

3. Connecting of insulation materials and roof construction.

4. Bonding and mounting.

5. Insulating the electrical outlets and water pipes.

6. Heat preservation, cold and sound insulation.

7. Packaging purpose, wrap the precious & fragile commodity, shake-proof and anti-pressure.

 

PRODUCT FEATURES:

 

1. Good adhesion to a wide variety of surfaces such as UPVC, masonry, brick,block work, glass, steel, aluminum, timber and other substrates (except PP, PE and Teflon).

2. Very good filling capacities.

3. Application temperature is between+ 5°C and +35°C

4. Optimal application temperature is between +18°C and +25°C

5. After curing temperature resistant range between -35°C and +90°C

6. It contains CFC-free propellants which are harmless to the ozone layer.

 

STOREAGE & SHLF LIFE:

 

12 months in unopened packing store in temperature between +5°C and +25°C, Keep in cool, shade and well ventilated area. Always keep the can with the valve pointed upwards.

 

APPLICATIONS:

 

1. Shake the aerosol can for at least 40seconds.

2. Clean and moisten surfaces with a water sprayer prior to application.

3. Fit the gun or straw on the adaptor. Firmly screw the can on the adapter and turn the flow adjustment screw.

4. Fill the holes and cavities approximately 50% as the foam will expand. Bottom up during application.

5. Foam will be tack-free in about 10 minutes.

6. Excess can be trimmed in about 20 minutes.

 

TECHNICAL FEATURES:

NO.	Item	Data
1.	Consistency	Stable Foam
2.	Curing System	Moisture-cure
3.	Tack-Free Time(min)	7-15
4.	Drying Time	Dust-free after 20-25 min
5.	Cutting Time(hour)	1-2(+25°C)
6.	Yield (L)	40-45
7.	Shrink	None
8.	Post Expanshion	None
9.	Cellular Structure	60-65% open cell
10.	Specific Gravity	17-22
11.	Temperature Resistance	-35°C - +90°C
12.	Application Temperature Range	+5°C - +35°C
13.	Color	Champagne
14.	Fire Class (DIN 4102)	B2
15.	Insulation Factor (Mw/m.k)	<34
16.	Compressive Strengh (kPa)	>120
17.	Tensile Strengh (kPa)	>30 (10%)
18.	Adhesive Strengh (kPa)	>80
19.	Water Absorption (ML)	2-3 (no epidermis)
		<0.5(with epidermis)

 

Products

 

 

Product-extrudeed foam:

 

Use:

 

 

Transportation:

 

 

Manufacturer:

 

 

certificates: