Microbrewery 10 HL/batch and 20 Hl fermenters, we sell our products to everywhere over the world
STEAM GENERATOR
- Type: 548-28
- Steam Output: 515 lbs/h
- Operation Pressure: 120 PSI
- Fuel consumption: 18m3/hour of natural gas
- Weight: 4155 lbs
- Power: 15 BHP
TWO Roller MALT MILL
- Two-roller malt mill designed to prepare grist for brewing by dry-milling of malt with adjustable outcoming grain-size.
- Capacity 600 Kg/h.
- Power 1,5 HP.
- Adjustable rollers allow for proper malt coarseness.
Water Treatment (2 stages):
HOT Liquor TANK
- Made of SS A.I.S.I. 304 – 2B.
- Total capacity: 19 HL.
- Top manway
- 101.6 mm vent chimney
- Thickness cylinder:3 mm.
- HLT has a 160° conical bottom.
- Thickness bottom 3 mm.
- Dual zone dimple heating jacket with steam inlet and outlet
- Polyurethane insulation thickness 50 mm, density 1,09 g/cm³:
both cylinder and conical bottom - Thickness external jacket: 1.5 mm
- Vessel heating is provided by two independently controlled steam heating section with heating capacity at 1° C per minute and steam pressure of 2 bar at 120°C temperature. Inlet of steam into heating section is controlled from central control panel by electrically operated solenoid valves, depending on temperature of heating.
- Temperature in the tank is registered by temperature sensors, which digital display is positioned in the Beerhouse control panel.
- Tank is equipped in the head with a sprayball for thorough washing and sanitation .
MASH LAUTER TUN:
- Made of SS A.I.S.I. 304 – 2B.
- Total capacity: 9 HL.
- Top manway for grain inlet
- Thickness cylinder:3 mm.
- MLT has a 160° conical bottom.
- Thickness bottom 3 mm.
- Cylinder dimple heating jacket with steam inlet and outlet
- Polyurethane insulation thickness 50 mm, density 1,09 g/cm³:both cylinder and conical bottom
- Thickness external jacket: 1.5 mm
- Spent grain manway on side
- Removable milled false-bottom placed above lower bottom (milled slots are 0.7 mm wide, throughput is 12%)
- A top mounted mash agitator system incorporates offset paddles to ensure thorough mixing of the mash. Paddles are driven by geardrive-motor and are controlled by an AC variable frequency drive.
- All piping is in stainless-steel. Outflow piping is fitted with a glass for wort clarity checking.
- Vessel heating as HLT
KETTLE/ WIRLPOOL TANK:
- Made of SS A.I.S.I. 304 – 2B.
- Total capacity: 12 HL.
- Top manway.
- Thickness cylinder:3 mm.
- KWT has a 160° conical bottom.
- Thickness bottom 3 mm.
- Heating as HLT.
- Polyurethane insulation thickness 50 mm, density 1,09 g/cm³:both cylinder and conical bottom
- Tangential jet for wort inlet and whirlpool
- Thickness external jacket: 1.5 mm
- Vessel heating as HLT
- Temperature in the tank is registered by temperature sensors, which digital display is positioned in the Beerhouse control panel.
- Tank is equipped in the head with a sprayball for thorough washing and sanitation.
PLATE AND FRAME HEAT EXCHANGER.
- 20HL/h.
- The plates and fittings are all 316 stainless steel
- Tremendously low restriction (5 PSI)
- Easy for cleaning and sanitization
- Two stages, first with cool water and second with cold water
UNITANK ( Fermenting & Conditioning ):
- Made of SS A.I.S.I. 304 – 2B.
- capacity: 25 HL
- Sanitary construction 100% TIG welded and sanitary polished with stringent controls, inspection and pressure testing.
- 4 stainless steel legs with leveling footpads
- Design pressure 30 psi
- Interior shell: 304 stainless steel, thickness 3 mm
- Exterior shell: 304 stainless steel, thickness 16 gauge
- Interior and exterior finish bright polish to 250 grit, hygiene surface
- 60 degree cone bottom, with 25% head space
- Racking port and discharge port with butterfly valve and fittings
- Side manway door, shadowless
- Dual zone dimple cooling jacket with glycol inlet and outlet
- Polyurethane insulation thickness 50 mm, density 1,09 g/cm³:
both cylinder and conical bottom - Fully welded exterior shell * CIP arm and spray ball
- Vacuum & pressure relief valve, relief pressure 15 psi, relief vacuum 5 psi
- Pressure gauge
- Thermometer
- Perlick style Sample valve
- Tank complete with fittings, valves and all parts
- Cylindrical and conical parts have independent glycol cooling zones controlled by temperature sensors and solenoid valves.
BRITE BEER TANK :
- Made of SS A.I.S.I. 304 – 2B.
- Capacity: 25 HL
- Sanitary construction 100% TIG welded and sanitary polished with stringent controls, inspection and pressure testing.
- 3 stainless steel legs with leveling footpads
- Design pressure 30 psi
- Interior shell: 304 stainless steel, thickness 3 mm
- Exterior shell: 304 stainless steel, thickness 16 gauge
- Interior and exterior finish bright polish to 250 grit, hygiene surface
- Flanged and dished head top and bottom, 25% head space
- Racking port and discharge port with butterfly valve & fittings
- Polyurethane insulation thickness 50 mm, density 1,09 g/cm³
- Side manway door
- Dual zone cooling jacket
- Fully welded exterior shell
- CIP arm and spray ball
- Carbonation system
- Vacuum & pressure relief valve as UNITANKS
- Pressure gauge
- Thermometer
- Perlick style sample valve
- Tank complete with fittings, valves and all parts
- Cooling zones as UNITANKS
COOLING UNIT:
- Power: 4.5 HP
- glycol-reservoir (insulated vessel)
- steel frame
- air chiller condensation unit
- heat exchanger
- Evaporator
- glycol-pump
- valves
- electrical switch-box (connected to central control panel)
- Working temperature range: -5/+30°C