| ≥1 piece |
The Canneed "Pop & Tear Tester PTT-200" has been developped for testing EO/ RP /SOT/ OVAL ends. The measurement is microprocessor-controlled. As test result the POP and TEAR strength appear in the display. Depending on the holder, ends of various diameters can be tested.
The PTT-200 is easy to use. Install the sample in the End holder, attach the hook into the ring of the tab. Depress the "start" button. The PTT-200 will then perform the tests according to the preset test procedures. If the measurement was successful you will see the results in the display: POP-force and TEAR-force value. The forces required transmitted via the RS-323 port.
Feature:
*Industry Standard
*Program Logic Control System (PLC) Controlled
*LCD touch-screen Display
*Rs-232 Communications Capability
Technical data (Changes reserved):
Measuring range : 0-100N
Resolution :0.1 N
Controller : Program Logic Control System
Display : LCD touch-screen
Interfaces : RS232C
Power supply: 115/230V/50-60Hz
Sample type : RP/SOT/EO/ OVAL
Dimensions : 850 x 350 x 420 mm l x B x H
Weight :20kg