Pressure Sensitive Tape Initial  Adhesion Tester applies to pressure-sensitive tapes, medical patches, self-adhesive labels, protective films and other products. It uses two methods: inclined rolling ball method and inclined groove rolling ball method.

Features

Ø With the principle of inclined rolling ball method,  instantaneous adhesion of samples can be obtained.

Ø Two Testing Methods: inclined rolling ball method and inclined groove rolling ball method.

Ø The steel balls designed in accordance with the standards ensure the accuracy of data.

Ø Testing inclined angle can be adjusted freely from 0°to  60° according to users’ requirements.

Principle

A: Inclined Rolling Ball Method.

The initial viscosity is measured with the touch of steel balls and the viscous surface of the sample. The steel ball rolls over the surface of the sample which is laid on a inclined plate. Then, evaluate the tack of the ball with the maximum length of the sticky surface to obtain the measurement.

B:Inclined Groove Rolling Ball.

Roll a steel ball of predetermined size through an inclined groove, then measure the distance rolling on the adhesive surface of the adhesive tape of a horizontal plate, and evaluate the size of the initial tack.

Standards

GB/T 4852, JIS-Z-0237, YY/T 0148, Chinese Pharmacopoeia

Applications

Configurations

Instrument, 29 steel balls, Screw Arbor.

Saicheng Instrument is always dedicated to the innovation and improvement of product performance and function. Therefore, technical specifications are subject to change without further notice.