| ≥1 piece |
silica Sand Dryer Introduction:
Silica Sand Dryer is also known as rotary drum sand dryer . For the drying of silica sand , the rotary drum dryer is used widely, and usually it is single drum sand dryer and triple-pass drum sand dryer .
As the moisture of silica sand is surface water, then in order to enhance the heat efficiency and processing capacity, we need to increase the contact area between silica sand and hot air as much as possible. Our triple-pass drum silica sand dryer achieves this aim perfectly. For one time drying, the silica sand dryer can dry the silica sand to be below moisture 1% directly.
Structure of Silica Sand Dryer :
Drum, gear, ring, carrier roller, air pipe, high pressure draught fan, reducer machine, chimney, cyclone dust catcher, 40mm thickness heat insulating layer, feeder, electric control box, belt conveyor, etc.
Specification of Silica Sand Dryer:
|
Model |
Processing Capacity |
Input Moisture |
Output Moisture |
Main Motor for Sand Dryer |
Coal Calorific Value |
Feedinlet Temperature |
|
Ø1.5X14M |
10-12 |
17-23% |
<10% |
15 |
>5500 KCAL/KG |
700 ± 50 ℃ |
|
Ø1.8X14M |
15-18 |
17-23% |
<10% |
18.5 |
>5500 KCAL/KG |
700 ± 50 ℃ |
|
Ø2.0X16M |
20-25 |
17-23% |
<10% |
18.5 |
>5500 KCAL/KG |
700 ± 50 ℃ |
|
Ø2.2X18M |
25-30 |
17-23% |
<10% |
22 |
>5500 KCAL/KG |
700 ± 50 ℃ |
Notice: Any change of Silica Sand Dryer technical data shall not be advised additionally.