| ≥1 piece | 42000 |
Static automatic sterilizer has a powerful pump resulting in shorter cycles, more homogeneous. AApplications:
the water immersion retorts are suitable for various heat resistant packaging materials.
1. Plastic container: pp bottle, hdpe bottle;
2. Soft pouch: aluminum-foil pouch, transparent pouch, vacuum pouch, high temperature retort pouch, etc.;
3. Metal container: tinplate cans, aluminum can.
Features:
1. The sterilization water after preheating, the starting point of sterilization temperature, shorten the sterilization time, protect the quality of the product;
2. Save energy and increase output. Two sterilization pot at the same time using a pot of hot water work;
3. Due to full water immersion, heat can penetrate into products all around;
4. Products can avoid air contact during the whole process, leading to zero coApplications:
the water immersion retorts are suitable for various heat resistant packaging materials.
1. Plastic container: pp bottle, hdpe bottle;
2. Soft pouch: aluminum-foil pouch, transparent pouch, vacuum pouch, high temperature retort pouch, etc.;
3. Metal container: tinplate cans, aluminum can.
Features:
1. The sterilization water after preheating, the starting point of sterilization temperature, shorten the sterilization time, protect the quality of the product;
2. Save energy and increase output. Two sterilization pot at the same time using a pot of hot water work;
3. Due to full water immersion, heat can penetrate into products all around;
4. Products can avoid air contact during the whole process, leading to zero cold air in kettle. The optimized water circulating system ensures balanced heat distributioApplications:
the water immersion retorts are suitable for various heat resistant packaging materials.
1. Plastic container: pp bottle, hdpe bottle;
2. Soft pouch: aluminum-foil pouch, transparent pouch, vacuum pouch, high temperature retort pouch, etc.;
3. Metal container: tinplate cans, aluminum can.
Features:
1. The sterilization water after preheating, the starting point of sterilization temperature, shorten the sterilization time, protect the quality of the product;
2. Save energy and increase output. Two sterilization pot at the same time using a pot of hot water work;
3. Due to full water immersion, heat can penetrate into products all around;
4. Products can avoid air contact during the whole process, leading to zero cold air in kettle. The optimized water circulating system ensures balanced heat distribution in kettle;
5. peak pressure value can be avoided by controlling back pressure via stream inlet and outlet, largely reducing packaging material damage;
6. smooth and rapid cooling helps avoid thermal shock and peculiar smell;
7. Plc program control, sterilization to achieve standardization;
8. The water immersion sterile equipment also integrates the function of f value measurement, but the f value tester is optional;
9. Newly-designed fluid switch device successfully keeps cold point in kettle to a minimum and temperature accuracy for sterilization within â±0.2â°c, effectively avoiding over-steaming and halfway sterilization.n in kettle;
5. peak pressure value can be avoided by controlling back pressure via stream inlet and outlet, largely reducing packaging material damage;
6. smooth and rapid cooling helps avoid thermal shock and peculiar smell;
7. Plc program control, sterilization to achieve standardization;
8. The water immersion sterile equipment also integrates the function of f value measurement, but the f value tester is optional;
9. Newly-designed fluid switch device successfully keeps cold point in kettle to a minimum and temperature accuracy for sterilization within â±0.2â°c, effectively avoiding over-steaming and halfway sterilization.ld air in kettle. The optimized water circulating system ensures balanced heat distribution in kettle;
5. peak pressure value can be avoided by controlling back pressure via stream inlet and outlet, largely reducing packaging material damage;
6. smooth and rapid cooling helps avoid thermal shock and peculiar smell;
7. Plc program control, sterilization to achieve standardization;
8. The water immersion sterile equipment also integrates the function of f value measurement, but the f value tester is optional;
9. Newly-designed fluid switch device successfully keeps cold point in kettle to a minimum and temperature accuracy for sterilization within â±0.2â°c, effectively avoiding over-steaming and halfway sterilization.ll products inside the retort get treated the same at any operating position. Shorter cycle can provide better performance.
Latest static hot water shower type retort sterilizer
It is the independently researched and developed high efficient water shower type sterilizer ,the door equipped with individually lifting system,the action force to the ground,steady,and high safety,reduce the failure rate.baskets sliding system is available ,one button operation ,high automation.
Suitable to all kinds of heat resistant package.
Parameters
Features:
1. Sterilization of high temperature and short time. Minimum Indirect heating, efficient source saving. Direct heating and indirect cooling. No touch between cooling water and the process water, successfully avoiding secondary contamination;
2. Steam and atomized sterilizing water will directly exchange the heat in the autoclave. Steam heat can be 100% used, saved heat energy and gained the maximum energy utilization;
3. Low noise of the water rain retorts, creating a quiet and comfortable working environment;
4. Perfect pressure control, the whole production process of the pressure in constant adjustment, in order to adapt to the changes in the internal pressure of the product packaging, particularly suitable for the product with gas packaging;
5. The sterilization equipment makes it convenient to configure automatic corollary equipment for unmanned food workshops in the future;
6. There are two kinds of doors for your choice, namely top door and side door (optional);
7. Process water heating system (optional) to ensure that the heat - filled product is continuously heated;
8. The use of water to soften the water (optional) to avoid the use of water quality problems caused by external packaging of dirt;
9. Steam sterilization function (option);
10. The whole sterilization process adopts PLC fully automatic linearity control. Via the PLC control, the temperature difference of thermal distribution is limited within ±0.2°C. The autoclave sterilizers allow for multi-stage heating, effectively saving energy. It also has an additional F value recorder (optional), capable of storing 100 scheduled processes;
Applications:
The water spray retorts are well applicable for a wide range of thermal resistant packaging materials.
1. Glass bottle;
2. Metal container: tin can, aluminum can;
3. Plastic container: PP bottle, HDPE bottle;
4. Soft pouch: aluminum-foil pouch, transparent pouch, vacuum pouch, high temperature retort pouch.