| ≥1 piece |
Dear friends ,
welcome to our company site !
1 .TOP full-automatic plastic bottle blow moulding machine(professional efficient)
2. 7600-8000pcs/h
3.plastic bottle
4. Accessories for the world famous brand is more than 90%
5. Adopts advanced microcomputer control system, stable performance
6.Adjust infrared heating lamps based on touch the temperature, the operation is simple, convenient, strong penetrating power, bottles of embryo heated, heating uniform, rotating rapid and stable.
JD-08X Main technical parameters
|
Composition |
Project |
Technical parameters |
|
Products conditions |
Products maximum volume(ml) |
600mL |
|
Products maximum diameter (MM) |
Φ70 |
|
|
Products size bottle (MM) |
Φ12 ~ Φ38 |
|
|
Prlducts maximum beight(MM) |
<240 |
|
|
Suitable for embryo tube maximum height (MM) |
<115 |
|
|
Shut the mould trip |
82 mm |
|
|
Bottom-formwork trip |
50mm |
|
|
Bottle spacing (MM) |
76.2 |
|
|
Mouldstandardthickness (MM) |
168 |
|
|
Production capacity (bottles/hour) |
7600-8000 |
|
|
Mold cavity number |
8 |
|
|
Heating part |
Heating unit |
4 |
|
Heating lamp layer |
6 |
|
|
|
Germ tubes seat number (a) |
114 |
|
Electrical parameters |
Voltage |
220/380V |
|
Frequency |
50/60Hz |
|
|
Use power |
24~28.8kw/h |
|
|
Installed power |
50.5kw |
|
|
Air (High-pressure gas consumption PET bottle volume on and calm) |
Low voltage compressed air pressure |
8~10bar |
|
Low voltage compressed air gas consumption |
2.0~2.5m 3 /min |
|
|
High-pressure compressed air pressure |
26~35bar |
|
|
High-pressure compressed air gas consumption |
3.6~4.2m 3 /min |
|
|
Cooling water |
Pressure |
3~4bar |
|
Cooling water (temperature≤18 °C ) |
Temperature |
5m 3 /h |
|
Weight |
Host\Heating machine\Body,etc |
5.5t |
|
Equipment configuration dimensions |
Sixe (L×W×H) |
4850mm×2150mm×2100mm |
|
Richard embryo machine (L×W×H) |
2550mm×2120mm×2900mm |