| ≥1 piece |
Vibrating Mill /2 ZM vib ration grinding machine type
This machine is a new type of high efficiency and energy saving grinding equipment, and traditional rotary ball mill has obvious advantages in comparison.
The machine has the vibration intensity big, high grinding efficiency, power consumption, compact structure, cover an area of an area small, installation, transportation, easy maintenance, etc. Can be widely used in dressing, building materials, chemical, grinding compound, special porcelain, refractory material and industry departments. 2 ZM vibration grinding machine series by grinding barrel, vibrator, supporting spring, drive motor, sound insulation cover the main components of the composition. Drive motor through the flexible coupling drive vibrator eccentric block in the rotation, thus produce periodic vibration force, make grinding mill barrel in supporting spring do high frequency vibration. With grinding the cylinder body grinding medium (bars or ball), mill vibration, drive the cylinder body grinding medium strongly aerosol propellant, impact and the rotating (revolution), rotation and into the cylinder body material grinding medium in the impact and the abrasive rapid broken down, and with material grinding, the equilibrium gradually to the material mouth movement, finally eduction mill become grinding products.
Into the grain-size (mm) more than 25 the grain-size (mm) 0.3 ~ 0.074 productivity (t/h) 8.5 ~ 3.5 cylinder volume (l) 1600 cylinder (a) number two vibration frequency (times/points) 1000 ~ 1500 the vibration intensity (g) 5 to 9 motor power (kW) 110 ~ 130
characteristics
This machine is compared with a ball, has the following characteristics:
1, cover an area of an area small, easy to install and isolation 2, the unit output low energy consumption
3, grinding size, simple operation, on 4 easy control
5, overall weight light, the output and the heavy machine than the big 6, the noise is small
7, and process simple, convenient maintenance 8, lining board and the medium easy replacement
9, not be the best index of 0.8 g acceleration influence, grinding media small, grinding surface. Change unit
Technical performance and its main parameters
|
project type |
2ZM-100 |
2ZM-200 |
2ZM-400 |
2ZM-6 00 |
2ZM-800 |
2ZM- 1200 |
|
|
Grinding way |
Dry and wet/open, closed circuit |
||||||
|
Into - the - grain-size （ mm ） |
≤15 |
≤20 |
≤25 |
||||
|
Thegrain-size （ mm ） |
0.3-0.074 |
||||||
|
production （ t/h ） |
0.1-1.5 |
0.2-3 |
0.2-5 |
0.3-8 |
1-10 |
1-16 |
|
|
amplitude （ mm ） |
9-14 |
9-14 |
8-11 |
8-11 |
7-9 |
7-9 |
|
|
motor |
power |
17- 22 |
22- 37 |
37- 45 |
45- 55 |
55- 75 |
75-90 |
|
|
speed |
970 |
980 |
980 |
980 |
990 |
990 |
|
frequency （ HZ ） |
16.2 |
16.3 |
16.3 |
16.3 |
16.5 |
16.5 |
|
|
weight （ t ） |
2.5 |
4 |
6.6 |
8.1 |
11.5 |
14 |
|
|
Shape dimension |
2612×1654 |
2900×1884 |
3800×2350 |
3800×2850 |
4843×2956 |
|
|