| ≥1 piece |
Principle
Wood plastic powder screening machine, as a piece of powder material screening equipment, uses horizontal vibration motor as its vibration source. The horizontal vibration motor has an eccentric block at both their upper and lower sides. The eccentric blocks can generate a three-dimensional movement in horizontal, vertical, and inclined directions. By adjusting the phase angles of the upper and lower eccentric blocks, the materials on the screen can be change the movement locus, achieving suitanle screening performance.
Features
1. The screening percision of vibration sieve is excellent, and the blocking rate of the screening is less than 10% in average.
2. The movement locus and vibration amplitude are both adjustable. Any granular, powder,and serious materials can be roughly screened, finely screened, or just filtered according to the material applications.
3. The screening machine is 500-1800mm in diameter, and the overall size is quite samll. Wheels can be mounted on it for convenient moving.
4. The screen frame of the stainless steel vibration sieve is specially designed. It takes only 5-10 min for the screen changing. The stainless steel wire woven net is easy to clean and operate, while the life span is quite long.
5. Completely enclosed structure is adopted so the particulate matter polluction in the air is quite limited.
6. The discharging outlet can be rotated at 360°, facilitating the installation of the matching equipment .
7. The energy consumption of our vibration sieve is small, while the noise could reach as low as 73-80dB.
8. During the operation, if short circuit, phase loss or unstable voltage occurred, the motor will automatically cut off tht power supply and stop working. Thus the motor damage can reduced to an extremely low level.
9. The IP rating of the motor is IP65, which means the motor is dusproof, and waterproof. Besides, the motor is also heatproof and oil resistant.
Application
Structural diagram
Parameter
| Model | Power | Diameter | Motor speed | Layer |
| DH-1000-2s | 0.75KW | 920mm | 1440r/min | 2 |