| ≥1 piece |
The 3M? Liqui-Cel? membrane contactor is made of some micro-porous hollow membranes, and these membranes are wrapped around the central tube inside the membrane housing. During operation, the liquid flows around the outside of the hollow membranes, while the inside of the membranes is in a vacuum environment or contains purge gas. Using vacuum mode or purging gas, the corresponding gas concentration difference can be generated between the inside and outside of the hydrophobic membranes. This difference in gas concentration will drive the dissolved gas to be quickly and efficiently transferred to or removed from the liquid stream, which can meet the different needs of different customers for removig or adding gas.
The Liqui-Cel? EXF-4×13 series membrane contactor has a large surface area of membranes, achieving high gas transmission performance and efficiency, simple operation, low instrumentation and maintenance requirements, and low operating costs.
Application: thermal deoxidation, chemical industry, steel, integrated circuits, optoelectronics, packaging, power plants, food, beer and beverages, imaging and medicine.
3M? Liqui-Cel? EXF-4×13Series Membrane Contactor Product Parameters
|
Component |
Enhanced Flow Design with Intermediate Partition |
|
|
Design Flow Range |
0.5 to 3.4 m3/hr（2 to 15 gpm） |
|
|
Membrane Type |
X50 Membrane |
X40 Membrane |
|
|
Recommended applications like removal of co2 gas or transmission between other gases and fluids. |
Recommended applications like removal of co2 gas or transmission between other gases and fluids. |
|
Membrane / Sealing Material |
Polypropylene/Polyethylene |
|
|
Internal Volume Of Membrane Module (Estimated) |
||
|
Shell Side Volume |
1.3 L (0.3 gal) |
|
|
Tube Pass Volume |
0.6 L (0.2 gal) |
|
|
Membrane Housing Material |
Polypropylene |
316L
stainless steel container and end cap |
|
Flange Connection |
||
|
Shell Side (Liquid Inlet/Outlet) |
· 1 inch sanitary joint 3/4 inch NPT inner joint · 1 inch GF connector · Rc 3/4-inch connector that meets the requirements of JIS B0203 |
1 Inch Sanitary Joint |
|
Tube Side |
· 1 inch 90° sanitary joint · 3/4 inch 90° NPT inner joint · Rc 3/4-inch connector that meets the requirements of JIS B0203 |
1 Inch Sanitary Joint |
|
Optional Sealing Material |
||
|
Fluororubber |
Perfluoroelastomer (K-Upw) |
Nitrile Rubber |
|
Application |
||
|
General Application |
Ultrapure Water |
General Application |
Guochu Technology (Xiamen) Co., Ltd. provides 3M Company's Liqui-Cel membrane contactor (degassing membrane): Liqui-Cel 0.5x1, Liqui-Cel 0.5x1SP, Liqui-Cel 0.75x1, Liqui-Cel 1x2SP, Liqui-Cel 1x3SP, Liqui-Cel 1x5.5 , Liqui-Cel 1x6SP, Liqui-Cel 1.7x5.5, Liqui-Cel 1.7x8.75, Liqui-Cel 2x6SP, Liqui-Cel 2.5x8, Liqui-Cel 2.5x8SP, Liqui-Cel 4x13, Liqui-Cel 4x13C, Liqui-Cel 4x13SP, Liqui-Cel 4x13SP C, Liqui-Cel 4x13SS, Liqui-Cel 4x13SS SP, Liqui-Cel 4x28, Liqui-Cel 4x28C, Liqui-Cel 4x28SP, Liqui-Cel 4x28SP C, Liqui-Cel 4x28SS, Liqui-Cel 4x28SS EP, Liqui-Cel 6x28, Liqui-Cel 8x20C, Liqui-Cel 8x20PVC, Liqui-Cel 8x20SS, Liqui-Cel 8x40 ASME Code-Rated, Liqui-Cel 8x40 8x80 C, Liqui-Cel 8x80 ASME Code, Liqui-Cel 10x28C, Liqui-Cel 10x28FRP, Liqui-Cel 10x28FRP IND, Liqui-Cel 10x28IND C, Liqui-Cel 10x28SS, Liqui-Cel 14x28, Liqui-Cel 14x40 and others.
Guochu Technology (Xiamen) Co., Ltd. provides all types of gas transfer membranes of 3M's Liqui-Cel TM EXF-4x13 series:
G826 4X13 CN X40 PP B0203 JIS KUPW A、G832 4X13 CN X40 PP B0203 JIS BUNA A、G646 4X13 CN SP PP B0203 JIS FKM A