| ≥1 piece |
Main description
This continuous sterilizer is newly designed and manufactured by introducing the advanced foreign technique. It is used for sterilizing kinds of food products, such as plastic/glass bottles of Juice and beer, tin can and aluminum can juice under ordinary pressure, and even for cooling the hot filling tea and juice drinks and warming the low temperature filling carbonated-soft drinks.
Main features:
This machine is combined by the circled hot water spraying, warm water pre-cooling, and warming cans segments that can get better water and energy conservation.
All of the cans will be carried in and out automatically, and the line would be achieved full automatically.
The whole body of the machine is made of 304stainless steel; In addition the machine has a good appearance, smooth running state and simply operation.
All the net-chains meet the food sanitary criteria and be approved by the FDA.
All of the spraying heads are specified atomizing heads, and it can spray on the containers evenly which avoid the damages to the cans.
Main Principle
The can or bottle after sealing is conveyed by the conveyor belt into the inside of the channel type pasteurizer. In all temperature areas inside the pasteurizer, the temperature of the product is precisely adjusted. When passing through the channel, the vessel is sprayed by water of different temperature, that is, the pre-heating section, heating section (sterilizing section) and cooling section. The gradual heating at the front of the sterilizer and the gradual cooling at the rear are very important. In this way, the taste loss that may be caused by overheating is prevented, and the bottle breaking comes of by sudden change of heat stress of vessel is avoided. In the channel type pasteurizer, our company normally adopts the spray nozzle system(a large-sized spray nozzle is installed, and hot water will be sprayed onto the vessel through the spray nozzle), maintained at different temperatures for different process requirements by a certain time, then sent to the transmission.
Main Parameter
| Specification | KU-1000 | KU-2000 | KU-3000 | KU-5000 | |
| Max sterilizing temperature | 100 centi degree | ||||
| Sterilization transferring belt width | 1500mm | ||||
| Transferring belt speed | 110-553mm\min(stepless speed) | ||||
| Heating steam pressure | 0.4MPa | ||||
| Length of sterilization step(mm) | 9000 | 16000 | 22000 | 32000 | |
| Length of pre Cooling step(mm) | 1200 | 1600 | 1800 | 2200 | |
| Length of cooling step(mm) | 3000 | 5000 | 8000 | 10000 | |
| Heating recycling water volume(m³ ) | 21 | 25 | 35 | 50 | |
| Power(kw) | 9.6 | 10.6 | 13.6 | 16.5 | |
| Size(mm) | Length | 9880 | 17880 | 23800 | 34880 |
| Width | 2250 | ||||
| Height | 1735 |
||||