| ≥1 piece |
Water filling machine is suitable for producing bottled water about 350ml, 500ml, 1l, 1.5l capacity, such as bottled pure water, mineral water, mountain spring water to be sold in the market.
Water filling machine integrates washing, filling, capping together. In the industry, it is commonly known as 3in1 filling machine. Filling principle of water filling machine is gravity filling. It is dedicated to fill Less viscous liquid without gas which is filled by liquid own gravity. According to the requirement of the market, to be based on 500ml pet bottle, the yield of water filling machine which is offered by our company ranges from 3000b/h to 36000b/h.
The running process of water filling machine as follows: Bottles are fed into the filling machine under the action of the wind by air conveyor. Neck of the bottle is stuck into the intermediate star wheel, which makes bottles connect with rinse clips during the rotation. The rinse clips grip neck of bottles, which makes bottles rotate along the particular track. First, the bottle is turned 180 degrees, which makes bottle mouth down. There is flush valve on each clip in the water filling machine. When the bottle is rotated to a specific position, the flush valve will be automatically opened to rinse inside of bottle. After empty bottles drip dry, they are turned 180 degrees once again to make bottles mouth up. Rinse step of water filling machine is completed. Then bottle is transmitted to filling part of water filling machine by the star wheel. Gravity filling valve is mounted blew the liquid cylinder. By adjusting the depth which filling valve port inserts bottle, to achieve filling of a given liquid level, to ensure that the liquid level of each bottle is within a predetermined range. There is a cam below the filling part in the water filling machine to control the catcher rod to linearly move up and down. First, to hold the bottle neck makes bottles slowly linearly move up. After touching closely with filling valve, to top open the filling valve and start filling. During the rotation, when water level of bottle reaches back to the trachea of filling valve, filling stops automatically under pressure. In the cam action, the catcher rod linearly moves down slowly to make bottles from filling valve. Filling step of water filling machine is completed. Finally, bottles after being filled are transmitted to capping part of water filling machine by the star wheel, for capping the bottle. Caps after being sterilized are transmitted to cap sorting device by cap elevator. By the chute, caps automatically enter capping port. At the outlet of filling part in the water filling machine, there is a detecting device. When it detects a bottle, a cap is released, to avoid capping malfunction. It is capping part of water filling machine.
The water filling machine adopts food grade 304 stainless steel material, Corrosion-resistant, easy to clean. The water filling machine adopts PLC to control. electrical components in use adopt international renowned brands, such as Mitsubishi, Siemens, Schneider. To control the water filling machine by HMI. Between the PLC and the man-machine interface, there is a signal interface to real-time display water filling machine operating conditions and parameters of each part. Once the faulty, it will immediately alarm and intelligently display relevant fault flashpoint and solutions, to be easy for maintenance personnel to resume operation of water filling machine in the shortest possible time.
bottled water production equipment includes water treatment equipment, blow molding machine, bottle unscrambler, air conveyor, water filling machine, cap elevator, cap sterilization machine, out of the bottle conveyor, light checker, Inkjet printer, labeling equipment, packing machine, robots Palletizer and a series of automated bottled water production equipment.
3 in 1 mineral water filling machine
3 in 1 mineral water filling machine
CO2 laser printer
shrink sleeve labeling machine
PE film shrink wrapping machine